Datasheet

CLOUD 47X0 F REFERENCE MANUAL 74
6.3.4.17. CNTLESS_P2P_INITIATOR_TRANCEIVE
This Escape command is used to send data to a target device. Prior to using this command, the
device should have been successfully switched to initiator mode using
CNTLESS_P2P_SWITCH_MODES (E9).
Input:
Offset
Description
Detailed description
0
0xE7
Initiator transceive
1
0x00
RFU
2
0x00
RFU
3
0x00
RFU
4
0 – No Chaining
1 – Chaining
Chaining
5
--
Timeout Low Byte
6
--
Timeout High Byte
Offset 7 to
7+N
N bytes of data
Bytes to be sent to target device
Output:
On successful reception of data from the target, the entire data would be available from offset
0x04. Presence of additional data is indicated by the chaining byte.
Offset
Description
Detailed description
0
RFU
1
RFU
2
RFU
3
0 – No Chaining
1 – Chaining
Chaining
Offset 4 to
offset 4+N
N data bytes
Bytes Received.