User's Manual

2.5 AP & Client
In this mode, all Ethernet ports and WLAN interface are bridged together and WLAN AP will extended a WIFI
Client interface to connect to access point. NAT function is disabled. All the WAN related function and firewall are
not supported.
2.6 WiFi Repeater
In this mode, all Ethernet ports are bridged together and the wireless client will connect to ISP access point. The
NAT is enabled and PCs in Ethernet ports share the same IP to ISP through wireless LAN. You must set the wireless
to client mode first and connect to the ISP AP in Site-Survey page. The connection type can be setup in WAN page
by using PPPOE, DHCP client, PPTP client, L2TP client or static IP.