HYBRID UPRIGHT FREEZER USER MANUAL MODEL CSH311NWL CSH311NWR CSH310NBSL CSH310NBSR Customer Service 1300 796 688 www.chiq.com.
PART NAMES AND LOCATIONS No. Description 1 Refrigerator drawers 2 Leveling feet IN ACCESSORY BAG: USER MANUAL, WARRANTY CARD, DOOR REVERSAL PARTS As the manufacturer holds the authority to redesign or modify its products without notice: Any modifications or upgrades of our products will result in this Refrigerator varying slightly from this manual but the functionality will remain the same to that as set out within this manual.
IMPORTANT SAFETY INSTRUCTIONS WARNING Follow these basic precautions to reduce the risk of fire, electrical shock hazards or injury when operating the Refrigerator: • This product has been designed for using in a normal domestic environment. It is not intended for commercial use which will avoid warranty, such as supermarket, food shop, pharmacy, commercial kitchen & etc.
R600a WARNINGS NOTE: This model uses R600a flammable refrigerant in its sealed system. The following must be observed for your safety: R600a Refrigerant Warning • This appliance contains 0.079kg grams R600a refrigerant which is environmentally friendly, but flammable. It does not damage the ozone layer, nor does it increase the greenhouse effect. • During transportation and installation, ensure that the tubing of the refrigerant circuit is not damaged.
Product Features This is an upright single-door inverter refrigerator with electronic control. It features switchover between the fridge mode and the freezer mode. Under the freezer mode, it can be used for the preservation of fish, meat, etc. that need be frozen for the long-term storage. Under the fridge mode, it can be used for fresh food storage, such as fruits, vegetables, eggs, milk, etc.
Door reversal instruction Door reversal job requests some spare parts which are in the accessory bag, top hinge, top hinge cover, bottom hinge and plastic door closer. For safety purpose, two people is recommended for the job. The following tool is required: ladder, flat screwdriver, phillips screwdriver, adjustable spanner, socket wrench and 8mm socket. (This instruction is for right hinge models. It can be done on opposite way for left hinge models.
take out two wire harness from there. f) Lift up the refrigerator door, remove it from bottom hinge and keep it on a stable place. g) Remove the front leveling feet, use adjustable spanner or socket wrench to remove the 4 screws, then remove the hinge. h) Get the lower left hinge from the accessory bag and install it on the bottom left hand side. door closer door stopper i) Remove the door stopper(metal) and door closer (black plastic) from the door right bottom position.
door to same color one from cabinet. l) Remove a magnet sensor from right top hinge cover (the one is removed at the beginning), the parts has two wires and a two pins socket. Install it under the new hinge cover from the accessory bag. Connect the two pins socket to the wire harness from the cabinet. Install front part first Magnet m) When install the top left hinge cover, put the front on the position first, make sure a clip is attached to the metal hinge properly.
INSTALLATION INSTRUCTIONS Before Using the Refrigerator • • • Remove the exterior and interior packing. Before connecting the Refrigerator to a power source, let the unit stand upright for approximately 4 hours to mitigate the possibility of a malfunction in the cooling system from improper handling during transportation. Clean the interior surface with warm water using a soft cloth.
• • under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized service center. After plugging the appliance into a wall outlet, turn the unit on and allow the unit to cool down for 4-6 hours before placing food in the Refrigerator. Do not place heavy items on the top of this appliance.
OPERATING INSTRUCTIONS Function & Setting The display panel is on the door, the following picture will show the display symbols and functions. When the refrigerator is connected to power supply for the first time, all icons on the display panel gets illuminated for 2s, and the system runs in the freezer mode at -18 ℃ by default. When door is closed, the display will turn off automatically. It will light up if door is opened or any key is pressed.
Exit or Enable the Child Lock function Press and hold the OK/Lock button more than 3s till a beeping sound, then the Child Lock function will be turned on or off. Fast freezer When the Fast freezer function is enabled, the unit will be set at -32℃. After 26 hours of running, the Fast freezer function will be turned off automatically. Cooling down the freezer temperature in a rapid manner is beneficial to the prevention of food nutrition against lost and the preservation of freshness.
Temp. Setting Before changing the setting, please make sure lock function is turned off. Also make sure the fast freezer or fast cool mode is turned off. Keep pressing the ‘+’ or ‘-’ to adjust the temperature to desired setting, then press the OK key or wait for 5s to validate the temperature setting.
GENERAL CARE AND MAINTENANCE Cleaning the Refrigerator • Upon installation of your new appliance, it is recommended that it be cleaned thoroughly and properly maintained thereafter. • Turn off the Refrigerator and then unplug the unit from the wall outlet. • Remove all food content before washing the inside with a damp cloth soaked in lukewarm water and dishwasher liquid. Don’t use any chemical detergent which might damage coating of the Refrigerator.
TROUBLESHOOTING GUIDE Problem The Refrigerator has no power Compressor runs all the time Temperature inside the Refrigerator is too cold. Solution Power cord isn’t plugged in properly. The circuit breaker tripped or a blown fuse. Try a different power point. The room temperature is hotter than normal. A large amount of food has been added to the Refrigerator. The door is opened too often. The door is not closed completely. The temperature control is not set correctly.
Moisture forms on outside of Refrigerator. The doors will not close properly. Door is slightly open, causing cold air from inside the Refrigerator to meet warm moist air from the outside. The Refrigerator is not on a level surface. The gasket/s may be dirty or not properly maintained. Clean the seals and make sure they are dry before closing the door/s. The storage basket and/or shelves are out of position.
Customer Service 1300 796 688 www.chiq.com.au c Changhong Electric (Australia) P/L all rights reserved.
