User Manual

b) Screw off the three bolts on the upper hinge,
remove the upper hinge, and pry off the upper
hinge cover, door sleeve, magnet.
c) Put the door communication wire into the hole
on the door, and then cover it.
d) Remove the three bolts from the hinge cover on
the left-side top of the refrigerator, remove the
hinge cover, take out the wire harness in the
hole, and install the door shaft sleeve.
e) Lift the refrigerator door up by 50mm to remove
the refrigerator door.
f) Remove the front leveling feet, use the tool to
remove the 4 screws to fix the hinge, and then
remove the hinge.
g) Take the lower left hinge out of the accessory
bag, and install it on the refrigerator with the
tools.