CSR092W USER MANUAL BAR FRIDGE Keep this manual in a safe location and use it for reference. Read this manual carefully before commencing operation of this appliance, and comply with the Terms and Conditions. www.chiq.com.
PART NAMES AND LOCATIONS No Description 1 Chill door 2 Thermostat 3 Drip tray 4 Shelf 5 Crisper cover 6 Crisper 7 Plastic retaining As the manufacturer holds the authority to redesign or modify its products without notice: Any modifications or upgrades of our products will result in this refrigerator varying slightly from this manual but the functionality will remain the same to that as set out within this manual.
IMPORTANT SAFETY INSTRUCTIONS WARNING Follow these basic precautions to reduce the risk of fire, electrical shock hazards or injury when operating the refrigerator: It is critical use this appliance safely. Read all instructions before operating the refrigerator and do not attempt to repair or modify this unit in any way as it can cause harm or void the warranty.
R600a WARNINGS NOTE: This model uses R600a flammable refrigerant in its sealed system. The following must be observed for your safety: R600a Refrigerant Warning • This appliance contains a small quantity of R600a refrigerant which is environmentally friendly, but flammable. It does not damage the ozone layer, nor does it increase the greenhouse effect. • During transportation and installation, ensure that the tubing of the refrigerant circuit is not damaged.
INSTALLATION INSTRUCTIONS Before Using the Refrigerator Remove the exterior and interior packing. Before connecting the refrigerator to a power source, let the unit stand upright for approximately 4 hours to mitigate the possibility of a malfunction in the cooling system from improper handling during transportation. Clean the interior surface with lukewarm water using a soft cloth.
Temperature Control The marks on the knob are the temperature grades, not the exact number of the degrees of temperature. "OFF" shows a forced STOP and "7" shows the lowest temperature. Turn the knob from "1" position to "7" position, the temperature setting decreases continuously. Set the knob to "4" position in normal use. But it can be adjusted to the setting that best suits your needs. Defrosting The appliance isn’t frost free model and it need to manual defrost regularly.
CHANGING THE LIGHT GLOBE Before removing the light bulb: First turn off the refrigerator and then unplug the unit from the wall outlet. (Failure to do so could result in electrical shock or personal injury) User small flat screw driver to remove screw cover in the front, then use Phillips screwdriver to take out screw. Remove the whole control panel to access the globe. Replace with a max 15 watt-refrigerator bulb that is the same shape and size. Refit cables and control panel back into place.
Repositioning and Relocating the Refrigerator Turn off the refrigerator first and then unplug the unit from the wall outlet. Remove all the food and drinks. Securely tape down all loose items inside your refrigerator. Tape the doors shut. Be sure the refrigerator stays in the upright position during transportation. TROUBLESHOOTING GUIDE Many common refrigerator problems can be easily, saving you the cost of a possible service call.
stabilize. Temperature of external refrigerator surface is warm. Popping or cracking sound when compressor comes on. Bubbling or gurgling sound, like water boiling. Vibrations. The exterior refrigerator walls can be as much as 30F warmer than room temperature. This is normal while the compressor works to transfer heat from inside the refrigerator cabinet. Metal parts undergo expansion and contraction, as in hot water pipes. This is normal.
