SIDE BY SIDE REFRIGERATOR USER MANUAL MODEL CSS559NWD CSS558NBSD CSS557NSD Customer Service 1300 796 688 www.chiq.com.
PART NAMES AND LOCATIONS IN ACCESSORY BAG: USER MANUAL, WARRANTY CARD, EGG TRAY, ICE BOX As the manufacturer holds the authority to redesign or modify its products without notice: Any modifications or upgrades of our products will result in this refrigerator varying slightly from this manual but the functionality will remain the same to that as set out within this manual.
IMPORTANT SAFETY INSTRUCTIONS WARNING Follow these basic precautions to reduce the risk of fire, electrical shock hazards or injury when operating the refrigerator: • This product has been designed for using in a normal domestic environment. It is not intended for commercial use which will avoid warranty, such as supermarket, food shop, pharmacy, commercial kitchen & etc.
R600a WARNINGS NOTE: This model uses R600a flammable refrigerant in its sealed system. The following must be observed for your safety: R600a Refrigerant Warning • This appliance contains 0.084kg R600a refrigerant which is environmentally friendly, but flammable. It does not damage the ozone layer, nor does it increase the greenhouse effect. • During transportation and installation, ensure that the tubing of the refrigerant circuit is not damaged. • Leaking refrigerant can ignite and may damage the eyes.
INSTALLATION INSTRUCTIONS Before Using the Refrigerator • • • Remove the exterior and interior packing. Before connecting the refrigerator to a power source, let the unit stand upright for approximately 4 hours to mitigate the possibility of a malfunction in the cooling system from improper handling during transportation. Clean the interior surface with warm water using a soft cloth.
• • (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized service center. After plugging the appliance into a wall outlet, turn the unit on and allow the unit to cool down for 4-6 hours before placing food in the refrigerator. Do not place heavy items on the top of this appliance.
OPERATING INSTRUCTIONS Function & Setting The display panel is on the fridge door, the following picture will show the display symbols and functions. When the refrigerator system is connected to power supply for the first time, all icons on the display panel gets illuminated for 2s, and the system runs in the Smart mode by default. When all the doors are close, the display will turn off automatically if no key operation within 3 minutes. It will light up if any door is opened or any key is pressed.
• If no key operation within 3 minutes, the Child Lock function will be active automatically. • Exit the Child Lock function manually Press and hold the Unlock button more than 3s till a beeping sound, then the Child Lock function will be turned off. Smart mode When smart mode is on, the temperature of the fridge compartment is set at 5℃, and freezer compartment at- 18℃. Under the Smart mode, the refrigerator is running more efficiently and with better performance.
Freeze symbol will stay on when it is active properly. Turn off Fast Freeze mode After a cumulative running period of 26 hours, the Fast Freeze function will be turned off automatically. Or press the Function key till the Fast Freeze is flashing, then quickly press the OK key to confirm. The fast freeze symbol will disappear when it is turned off.
Door open alarm If any door is opened for more than 3 minutes, buzzer alarm will be continuously beeping. It can be stopped by pressing any key button, but will be restored after 3 minutes if the door keeps opening. The alarm will stop when the doors are closed properly. Power cut memory In the case of power failure, the refrigerator will maintain the previous setting when the power supply is restored.
Dispense water Depress the water switch with cup or container till reaches the required amount, then release the water switch. Don't take away the cup until no waterdrop. When using the water dispenser, some water may drip and accumulate at the bottom of the water dispenser. Please wipe it with a cloth when necessary. GENERAL CARE AND MAINTENANCE Cleaning the Refrigerator • Upon installation of your new appliance, it is recommended that it be cleaned thoroughly and properly maintained thereafter.
Repositioning and Relocating the Refrigerator • • • • • Unplug the power cord from the wall outlet. Remove all the food and drinks. Securely tape down all loose items inside your refrigerator. Tape the doors to be closed securely. It is recommended that the refrigerator stays in the upright position during transportation. But if it is laid down for transport purpose, please lift it up immediately after the job is done. Please wait for at least 24 hours before putting the power.
Temperature inside the refrigerator is too cold. Temperature control is set too cold. Turn the control to a warmer setting and allow several hours for the temperature to stabilize. The exterior refrigerator walls can be as much as 15-20 degrees warmer than room temperature. This is normal while the compressor works to transfer heat from inside the refrigerator cabinet to the condenser behind the refrigerator side walls. Popping or cracking sound when compressor comes on.
Customer Service 1300 796 688 www.chiq.com.au c Changhong Electric (Australia) P/L all rights reserved.