H4 SERIES L24H4
Contents Warning...........................….....................………………………........................1 Safety instructions…………………………………….....…………....................5 Main Unit Control............................................................................................ 6 Connection and setup.................................................................................... 8 Getting Started………………………..……………...………………..….….......10 Using the Remote Control........…………………...........…………...................
Warning DEAR CUSTOMER: Before operating, please read all these safety and operating instructions completely and then retain this manual for future reference. Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
Warning IMPORTANT WARNINGS AND CAUTIONS! Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. 1.
Warning 10. The MAINS plug of the apparatus is used as the disconnect device, the disconnect device shall remain readily operable. 11. Wall mounting---When mounting the product on a wall, be sure to install the product according to the method recommended by the manufacturer. This is a safety feature. 12. Stand--- Do not place the product on an unstable trolley, stand, tripod or table.
Warning IMPORTANT INFORMATION If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: a. Using cabinets or stands recommended by the manufacturer of the television. b. Only using furniture that can safely support the television. c. Ensuring the television is not overhanging the edge of the supporting furniture. d.
Safety Instructions IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 7. Do not block any ventilation openings. Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table-cloths, curtains etc. 8. Do not install near any heat source such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 5.
Safety Instructions 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 13. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. 11. Educate children about the dangers of climbing on furniture to reach TV controls. 14.
Main Unit Control Front Panel 3 VOL VOL CH CH MENU SOURCE POWER Remote sensor Power Indicator No. Name Description Turns the unit on and off. 1 3 SOURCE MENU To switch among the signal source. Open the menu. 4 CH+/CH- Changes the channels. 5 VOL+/VOL- Adjust the volume. 2 NOTE: Keypad may change model to model.
Main Unit Control AV R AUDIO L VIDEO Rear & Sides Panel 7 1 2 HDMI2 HDMI1(ARC) 3 SATELLITE 500mA) DIGITAL AUDIO OUT (5V DC IN USB2.0 6 5 4 1. AC Adaper port. 2. Digital Audio Output port 3. HDMI port (HDMI1supports ARC function). 4. Antenna input 5. USB port 6. Earphones / headphones jack 7. AV audio in input NOTE: Input / Output connectivity options may change from model to model.
Connection and setup Connection Installation Before the installation and use, please read carefully the relevant content in “Warning and Safety instructions”. : Connect it to your headphone or other audio equipment. HDMI: Support AV devices with an HDMI connector (such as set top box, DVD player, digital TV set, etc.).HDMI is also called as high definition multimedia interface, and it can transmit digital audio and video signal with one cable.
Getting Started Using the Remote Control When using the remote control, aim it at remote sensor on the television. If there is an object between the remote control and the remote sensor on the unit, the unit may not operate. Point the remote control at the REMOTE SENSOR located on the television. When using this television in a very brightly lit area, the infrared REMOTE CONTROL SENSOR may not work properly. The recommended effective distance for using the remote control is about 7 meters.
Remote Control The buttons of the original remote control are as following: Definition of the buttons on remote control: 1. 2 1 3 4 6 8 1 2 3 4 5 6 7 8 9 DMP 0 EPG 10 15 16 20 21 24 25 . 5 7 EXIT CH LIST VOL INFO SLEEP INDEX STILL SUBTITLE RADIO AUDIO . ENTER: Select or confirm menu item. 9. ▲/▼/◄/►: Press the direction buttons to 11 select menu options or settings. 12 : Return to last viewed program. 10. 14 . EXIT: Quit the current interface. 12.
Remote Control 2 1 3 4 6 8 1 2 3 4 5 6 7 8 9 DMP 0 EPG 7 MENU 9 ENTER 10 13 15 16 5 SOURCE EXIT CH LIST VOL INFO SLEEP INDEX STILL SUBTITLE RADIO AUDIO 11 12 14 17 18 19 20 21 24 25 22 23 27 26 . ,NFO: display the current program : Go to the information on the screen. index page. 19. COLOR BUTTONS: Red/green/yellow/ blue key navigation link.
Basic Operation Turning on and off the TV • Turn on the TV Connect the TV to your mains socket. If TV has a power switch, turn it on firstly. In standby mode, press Power button on the remote to turn on the TV. • Turn off the TV Press the button on the remote control to enter standby mode. Do not leave your TV in standby mode for long periods of time. It is best to unplug the power cord. NOTE: If there is an accident power off, the TV will be in standby mode automatically after re-supply the power.
Basic Operation Choosing a TV channel • Using the CH / on the remote control. Press CH to increase channel number. Press CH to decrease channel number. • Using 0-9 digital buttons. You can select the channel number by pressing 0 to 9. Additionally, when TV is in some mode, the TV will work in TV mode and play the corresponding channel if any number button is pressed. • Example To select - channel (e.g. Channel 5): Press 5. To select -- channel (e.g. Channel 20): Press 2 and 0 in a short time.
Menu Operation How to Navigate Menus Before using the TV follow the steps below to learn how to navigate the menu in order to select and adjust different functions. The access step may differ depending on the selected menu. 1. Press the MENU button to display the main menu. CHANNEL PICTURE SOUND TIMER LOCK OPTION 2. Press the ◄/►buttons to cycle through the main menu. You can choose between Channel, Picture, Sound, Timer, Lock and Option. 3. Press the ENTER button to access the submenu page. 4.
Menu Operation Channel Menu CHANNEL Auto Tuning DTV Manual Tuning ATV Manual Tuning LCN Enable On Dynamic Rescan Off Programme Edit Signal Information Move Select Return ■ Auto tuning: Select the ENTER button to start Auto Tuning. 1. Select the country and. tune type for channels. 2. The TV will begin memorizing all of the available channels. Once the progress bar is full, the found channels will be stored and the unit will proceed to the search for TV, DTV and Radio.
Menu Operation Delete: Press the RED button to delete the channel. Move: Press the YELLOW button to set the channel to moving state, and then press the ▲/▼buttons to move it to the position you want to put. Skip: Press the BLUE button to skip the channel. (Your TV set will skip the channel automatically when using CH / to view the channels.) button to set the favorite channel. Favorite: Press the (One or more groups can be select.
Menu Operation ■ ■ ■ ■ OverScan (In DTV mode): The picture reproduction rate is adjusted. PC Mode (In HDMI mode): Switch PC Mode function On or Off. Game Mode (In HDMI mode): Switch Game Mode function On or Off. Picture Reset: Reset all picture settings to the factory defaults. Sound Menu SOUND Sound Mode Standard Balance 0 Off AVL Surround Off SPDIF Mode PCM AD Switch Audio Delay Sound Reset Move ■ Select Return Sound Mode: You can select a sound mode to suit your personal preferences.
Menu Operation Timer Menu TIME Auto Sync On 00:25 Clock Sleep Timer Off Auto Sleep 4Hours No Signal Power Off Time Zone On 1HZ 6RXWK :DOHV GMT 30S OSD Timeout Move ■ ■ ■ ■ ■ ■ ■ Select Return Auto Sync: If set it to On, the TV will sync the local clock according to the DTV broadcasting time automatically. Clock: Display either the DTV signal stream time or set the time manually. Sleep Timer: Sleep Timer switches the TV to standby after a defined period of time.
Menu Operation Block Program (In ATV/DTV mode): Press the YELLOW button to lock the available channel you want. Press the YELLOW button again to unlock it. To watch a locked channel, enter your 4 digit password number when input screen displays. ■ Parent Lock (In DTV mode): This feature can prevent children watching adult’s TV programmes, according to the rating limit set. This function appears according to information from broadcasting station.
Menu Operation ■ ■ ■ ■ ■ ■ – Auto Power On: Pushing the "Play" button on the CEC enabled device will command the device to play, turn the TV on, and the HDMI input, that the device is connected to, will become the active input device for the TV. – Device List: Display devices that are connected to TV. Power On Logo: Switch the Power On Logo function On or Off. Default: Restore the system settings to the factory default. When the restore is complete, the TV will enter standby mode.
Menu Operation the device isn't compatible with the TV or is damaged. The larger USB device will take longer time to format please be patient until the formatting finishes. – Time Shift Size: You can select the memory size for Time Shift function. – Speed: Press ENTER to check the speed of the storage device. – Free Record Limit: Select the recording duration. Recording There are two types of recording: Instant Recording and Schedule Recording.
Menu Operation Playing the Recorded Programmes Option1: After recording has finished, press the INDEX button to display the Recorded list. Press the ▲/▼ button to select the recorded file, and then press the ENTER button to play the file. Press the red button to delete the file you no longer require. Press the EXIT button to quit the menu. Option2: Also you can play the recorded programme in USB mode. Press SOURCE button to display the input source menu.
Menu Operation Hotel Mode ► ◄ Press the SOURCE button to display the Source Menu, then press 2012 to enter into the Hotel Mode to adjust the relative settings. Hotel Mode On - Hotel Mode Press the / buttons to select Hotel Mode, and then On Source Air press ◄/► button to set On or Off. On Channel 2 NOTE: On Volume 30 The following settings work only when Hotel Mode is Max Volume 60 set to be On. Export to USB - On Source Import from USB Set the default signal source by pressing the ◄/► buttons.
Menu Operation • The formats supported Media File Ext. Codec Video .mpeg, .mpg MPEG1/2,MPEG4,VC1 .vob, .dat MPEG1/2 .ts, .tp, .trp MPEG1/2,H.264,MVC, VC1,HEVC .avi Remark MPEG1/2 Layer1,MPEG1/2 Layer2,MPEG1/2 Layer3,AAC,AC3, EAC3,HEAAC MPEG1/2 MPEG1/2,MPEG4, Layer1,MPEG1/2 H.263, H.264, VC1, Layer2,MPEG1/2 XviD Layer3,WMA,AAC,AC3 ,HEAAC MPEG1/2 Layer3,AAC,AC3, .mp4，.mov MPEG1/2,MPEG4, D,H.263,H.264 HEVC .mkv MPEG1/2,MPEG4, H.263,H.
Menu Operation Photo Baseline JPEG Max Resolution:15360×8640 (1920x8 x 1080x8) -- Max Resolution: 9600×6400 Non-Interlaced Max Resolution: 9600×6400 .bmp .png Text Max Resolution: 1024×768 Progressive JPEG .jpg, .jpeg .txt Interlaced Max Resolution:1200×800 TM Player File Size：Max 1MB NOTE: Special algorithm documents may not be or well be supported by the Media. The Media supports the format mentioned above, if the file format is not supported, change it to the given format.
Menu Operation When playing Music files: 00:00:37 / 00:05:19 Pause FB FF Prev. Next Stop Repeat... Play List Info ＊ Use the◄/► buttons, then press ENTER to select a function such as Previous, Next, play, pause the on-screen toolbar. or EXIT buttons to exit playback & go back to file list page. ＊ Press When playing Movie files: 00:00:37 / 00:05:19 Pause FB FF Prev. Next Stop Repeat... set A Play List Info Slow Fo.. Goto Ti.. Zoom In Zoom.. Move V...
Important Unique Buttons PROGRAMME GUIDE (In DTV mode) Press EPG button to display the Programme Guide menu. This function let you know the detailed information of the channel, indicating the time of the program playing. From the Programme Guide it is possible to check the program information for the next eight days (If the information is available from the Programme Guide TIMER broadcaster).
Important Unique Buttons Favorite List button to display the Favorite List. Press Press red, green, yellow, blue button to select the desired favorite group. Press the ▲/▼ buttons to select the channel and press ENTER to watch it. Press CH / button to page up or down the Favorite list. Press EXIT button to exit the Favorite List.
Teletext Using the teletext feature • Display teletext 1. Select a TV station with a teletext signal. button to enter teletext mode. 2. Press the 3. Press the button 2nd to enter Mix mode, this function enables you to superimpose the teletext page over the TV program. button 3rd return or exit to the normal TV/DTV mode. 4. Press the • Page selection 1. Enter the page number (three digits) using the number buttons.
Troubleshooting Guide Troubleshooting When you meet the following common problems, you might diagnose and get the solutions without contacting with the technicians. Symptoms Possible Reason No picture, no sound, and no indicator light on 1.The power cord is not plugged in 1.Plug the power cord in 2.The power is off 2.Turn the power on Picture and sound with abnormity 1.Contrast, sharpness, and color are set improperly 2.Color system is set improperly 3.
Troubleshooting Guide Maintenance Early malfunctions can be prevented. Careful and regular cleaning can extend the life of your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the screen 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then used it to wipe the screen. 2.
