Contents Warning... Safety Instructions, Main Unit Control.. Connection and setup. Sling the Remote Control Installing Batteries In the Remote Control. Turing on and off the TV. First Time Choosing a TV channel Volume Changing the input source. Menu Picture menu.. Sound menu... Important Unique Button: PROGRAMMER GUIDE.
Warning DEAR CUSTOMER: Before operating, pleads read all these safety and operating Instructions completely and then retain this manual for future reference. Always comply with the following precautions to avoid dangerous situations and ensurers peak performance of your product. Q _CAUTION 0 WARNING: TO REFUGE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER {OR BACILLI. NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
Warning r IMPORTANT WARNINGS AND CAUTIONS! Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following Instructions when Installing, operating and cleaning the product. 1.
Warning ( 10. The MAINS plug of the apparatus is used as the disconnect device, the disconnect device shall remain readily operable. 11. Wall mounting—When mounting the product on a wall, be sure to install the product according to the method recommended by the manufacturer. This is a safety feature. 12. Stand— Do not place the product on an unstable trolley, stand, tripod or table.
Warning IMPORTANT INFORMATION If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: a. Using cabinets or stands recommended by the manufacturer of the television. b. Only using furniture that can safely support the television. ©. Ensuring the television is not overhanging the edge of the supporting furniture. d.
Safety Instructions (IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 7. 2. Keep these Instructions. 3. Heed all wakings. 4. Follow all instructions. Do not block any ventilation openings. Ventilation should not bs impeded by covering the ventilation openings with items such as newspapers, table-cloths, curtains ele. &. Do not use this apparatus near wale. 8. Do not install near any heat scarce such as radiators, heat registers, stoves, of other apparatus {including amplifiers) that produce heat.
Safety Instructions 'd N 18. Protect the power cord from being 13. For added protection for this walked on or pinched particularly at product during a lightning storm, or plugs, convenience receptacles, wham it i3 loft unattended and and the point whens they sit from unused for long periods of ime, the apparatus. unplug it from the wall cutlet and disconnect the cabs system. 11, Educate children about the dangers 14, Refer all servicing to qualified of climbing on eremite fo reach TV service personnel.
Main Unit Control Front Plano Remote sensor Power Indicator No. | Name Description 1 | POWER Tums the unit on and off. 2 | SOURCE To switch among the signal source 3 |MENU Open the menu. 4 | Changes the channels. 5 | Maladjusted the volume. NOTE: Keypad may change model to model.
Main Unit Control 1. DIN: DC Ada per port. port. 3. HDMI: HDMI port. 4, VGA: VGA port. 5. ANT: Antenna port. 6. EARPHONE: Headphone port. 7. USB: USB port. & PC Audio: PC Audio port. 4, Ypres: Ypres input port. 10. OPTICAL: OPTICAL port. NOTE: Input/ Output connectivity options may change from model to model.
Connection and setup Before the Installation and uss, please read carefully the relevant content In “Naming and Safety instructions”. €Q: Connect lt to your headphone or other audio equipment. HDMI: Support AV devices with an HDMI connector (such as set top box, DVD player, digital TV set, is also called as high definition multimedia interface, and it can transmit digital audio and video signal with one cable.
Getting Started When using the remote control, aim it at remote sensor on the television. If there is an object between the remote control and the remote sensor on the unit, the unit may not operate. # Point the cremate contra at the REMOTE SENSOR located on the television. # When using this television In a very brightly lit area, the Infrared REMOTE CONTROL SENSOR may not work properly. * The recommended effective distance for using the remote control is about 7 meters.
Remote Control The buttons of the original remote control are as following: Definition of the buttons on remits control: Pow, Crass to enter or exit the standby mode. 00 : Mute or restore sound. NUMBER BUTTONS: Choose channels or password importation. ‘@ Switch an/off the favorite programs list. Microelectronic Program Guide, use in the DTV mode. MENU: Press to display/disappear the on screen menus or to quit some operations. SOURCE: Press to select signal source ENTER: Select or confirm menu stem.
Remote Control The buttons of the original remote control are as following: Definition of the buttons on remote control: 44 Fast reverse (in Media mode) W: Fast forward (in Media mode) W Previous (In Medea mode) PPl Next (in Media mode) Pl Play / Pause (In Mafia mode). I Stop (In Mediator mods). A:Open or close the disc compartment (DVD). SUBTITLE: Enter the subtitle menu. 21. CANCEL: Displays recorded program Information. 22. TEXT:Press this button enter to TELETEXT mode. 23.
Basic Operation T *Tum on the TV Connect the TV to your mains socket. If TV has a power switch, tum it on firstly. In standby mode, press & Power button on the remote ta tum on the TV. * Tum off the TV Press the ¢ button on the remote control to enter standby mode. Do not leave your TV in standby mode for long periods of time. It is best to unplug the power cord. NOTE: > If thees is an accident power off, the TV will be in standby made automatically after re-supply the power.
Basic Operation e * Using the CH~/~ on the remote control. Press CH~ to increase channel number. Crass CHv to decrease channel number. + Using 0-9 digital buttons. You can select the channel number by pressing 0 to 9. Additionally, when TV is in some mode, the TV will work in TV mode and play the corresponding channel If any number button Is pressed. » Example To select channel {e.g. Channel 5): Press 5. To select — channel (8.g. Channel 20): Press 2 and 0 In a short ime.
Menu Operation Be fare using the TV follow the steps below to meal how ta navigate the menu in order to select and adjust different functions. The access step may differ depending on the selected menu. 1. Press the MENU button fo display the man menu. 2. Press the to cycle through the man menu. You can choose between Channel, Picture, Sound, Timer, Lock and Option. 3. Press the ENTER button to access the sub menu page. 4. Press the A/V buttons fo select the preferred option. 5.
Menu Operation Auto tuning: Select the ENTER button to start Auto Tuning. 1. Select the country and tune types for channels. 2. The TV will begin memorizing all of the available channels. Once the progress bar is full, the found channels will be stored and the unit will proceed to the search for TV, DTV and Radio. If you press the MENU button in TV searching, the Channel Tuning will skip to DTV searching as the suggestive picture shows. H DTV Manual Tuning: Press the ENTER button.
Menu Operation Delete: Press the RED button to delete the channel. Move: Press the YELLOW button to set the channel to moving state, and then press the A/ ¥ buttons to move it to the position you want to put. Skip: Press the BLUE button to skip the channel. (Your TV set will skip the channel automatically when using Chavez to view the channels) Favorite: Press the @ button to set the favorite channel. (One or more groups can be select.
Menu Operation Over Scan {In DTV mode): The picture reproduction rate is adjusted. H PC Mode (In HDMI mode): Switch PC Mode function On or Off. Game Mode (In HDMI mode): Switch Game Eds function On or Off. Picture Reset: Reset all picture settings fo the factory defaults. Sound Soda: You can select a sound mode to suit your personal preferences. Treble and Bass can be adjusted when the sound mode is set to User. Balance: Adjust the level of sound coming from the left and right speakers.
Menu Operation Clock: Display either the DTV signal stream time or set the time manually. Sleep Timer: Sleep Timer switches the TV to standby after a defined period of time. To cancel the Leap Timer, set to "Off ". Auto Sleep: Select the Auto Sleep time you want. The TV will enter into standby mode automatically when there is no any operation in set time. Time Zone: Select your time zone (When the Auto Sync is set On, the Time Zone can be adjusted).
Menu Operation Block Program (In LATVIA mode): Press the YELLOW button to lock the available channel you want. Press the YELLOW button again to unlock It. To watch a locked channel, enter your 4 digit password number when input screen displays. Parent Lock {In DTV mode): This feature can prevent children watching adult's TV programmed, according to the rating limit set. This function appears according to information from broadcasting station.
Menu Operation — Auto Power On: Pushing the "Play” button on the CEC enabled device will command the device to play, tum the TV on, and the HDMI Input, that the device Is connected to, will become the active Input device for the TV. — Advice List: Display devices that are connected to TV. e How to use PVR function? Q Preparing © Plug USB flash drive or USB hard disk into USB slot on the left hand side of the TV set. NOTE: + USB disk should have capacity at least 512MB. =+ USB advice must support USB 2.
Menu Operation the device isn't compatible with the TV or is damaged. The larger USB device will take longer time to format please be patient until the formatting finishes. — Time Shift size: You can select the memory size for Time Shift function. — Speed: Press ENTER to check the speed of the storage device. — Free Record Limit: Select the recording duration. O Recording There are two types of recording: Instant Recording and Schedule Recording.
Menu Operation Q Playing the Recorded Programmed Option: After recording has finished, press the INDEX button to display the Recorded list. ® Press the A/V button to select the recorded file, and then press the ENTER button to play the file. ® Press the red button to deletes the fell you no linger require. ® Press the EXIT button to quit the menu. Option: Also you can play the recorded programmer in USB mode. @ Press SOURCE button to display the Input source menu.
Menu Operation « First, Insert a USB memory device Info the USB port. » Press the SOURCE button to call up the signal source selection menu. Use the A/V to highlight USB, and the press ENTER button to access the USB mode. (Alternatively, Press the DMP button on the remote control to enter the USB mode) +You may also use the signal source selection menu to exit from the USB mode. NOTE: + Special USB device may be not or well supported. ¢ USB max. Load: DC 500mA.
Menu Operation ) Progressive JPEG Max Resolution: 1024%768 g, JPEG Max Resolution: 153608840 Baseline JPEG (152000 % 1050x8) Photo -bmp -Max Resolution: 8600%8400 Non-Interfaced Max Resolution: 8600%6400 Interlaced Max Text it ™ Player File Sirs: Max 1MB NOTE: + Spacial algorithm documents may not bs or well be supported by ths Media. + The Mafia supports the format mentioned above, if the file format is not supported, change it to the| glen format. + Man Operating Interface « Basic operation 1.
Menu Operation When playing Music files: * Use the«/p buttons, then press ENTER to select a function such as Previous, Not, play, pause the on-screen toolbar. * Press m or EXIT buttons to exit playback & go back to filch list page. When playing Movie fells: Press the INFO/ENTER button on the remote control to display the on-screen toolbar. * Use the«t/» buttons, then press ENTER to select a function such as play, pause, previous file, next file, from the on-screen toolbar.
Important Unique Buttons Press EPG button to display the Programmer Guide menu. This function let you know the detailed information of the channel, indicating the time of the program playing. From the Programmer Guide it is possible to check the program information for the next eight days {If the information is available from the broadcaster). * Press the A/ ¥ buttons to select a different channel In the list and press ENTER to active the channel.
Important Unique Buttons Press ¥ button to display the Favorite List. Press red, green, yellow, blue button to select the desired favorite group. Press the A/¥ buttons to select the channel and press ENTER to watch it. Press Chatterton to page up or down the Favorite list. Press EXIT button to exit the Favorite List.
Teletext Using the teletext feature + Display teletext 1. Select a TV station with a teletext signal. 2. Press the & button to enter teletext mode. 3. Press the & button 2nd to enter Mix mode, this function enables you to superimpose the teletext page over the TV program. 4. Press the & button 3rd rectum or exit to the normal HDTV mode. « Page selection 1. Enter the page number (three digits) using the number buttons.
Troubleshooting Guide When you meet the following common problems, you might diagnose and get the solutions without contacting with the technicians. Symptoms Possible Reason Solutions No lecturers, no sound, and no Indicator light on 1.The power cord is not plugged in 2.The power is off 1.Plug the power cord in 2.Tum the power on Replete and sound with abnormality 1.Contrast, sharpness, and color are set improperly 2.Color system Is set Improperly 3.
Troubleshooting Guide Early malfunctions can be prevented. Careful and regular cleaning can extend the life of your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the screen 1. Here's a great way to keep the dust off your screen for a while. Wet a soft cloth Ina. mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it's almost dry, and then used it to wipe the screen. 2.