U43H6
Warnings DEAR CUSTOMER: Before operating, please read all these safety and operating instructions completely and then retain this manual for future reference. Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
Warnings IMPORTANT WARNINGS AND CAUTIONS! Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. 1.
Warnings 11. Wall mounting---When mounting the product on a wall, be sure to install the product according to the method recommended by the manufacturer. This is a safety feature. 12. Stand--- Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Always place the TV on furniture that can safely support the TV.
Warnings IMPORTANT INFORMATION If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: a. Using cabinets or stands recommended by the manufacturer of the television. b. Only using furniture that can safely support the television. c. Ensuring the television is not overhanging the edge of the supporting furniture. d.
Safety Instructions IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 7. Do not block any ventilation openings. Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table-cloths, curtains etc. 5. Do not use this apparatus near water. 8.
Safety Instructions 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 13. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. 11. Educate children about the dangers of climbing on furniture to reach TV controls. 14.
Main n Unit Con ntrols Front Panel Remo ote sensor Powe er Indicator PO OWER/MENU U Button : - Long L Press for power off. - Short S Press fo or power on / home h page. CHANNEL C buttons: / (C CURSOR butttons: ▲/▼ in menu m mode) VOLUME V butto ons: + / (C CURSOR butttons: ▶/◀ in menu m mode) NO OTE: ◆ Keypad may change model to model.
Main n Unit Con ntrols USB2.0 500mA) Back view v controls s and sockets s 7 9 8 HDMI3 HDMI2 HDMI1(ARC)) PC PC AUDIO ANT DIGITAL AUDIO OUT 7 (5V USB2.0 500mA) LAN Pr Pb Y/VIDEO AV/COMPONENT R AUDIO L 200 AV OUT (5V 200 1 3 2 No. Name 4 5 6 Description 1 LAN 2 HDMI Local area ne etwork (LAN) p port. Connect a LAN cable to this port p to connectt to the Netwo ork. HDMI (High-D Definition Multiimedia Interfac ce) input. 3 4 PC/PC AUDIO ANT PC ports/ PC audio in.
Gettiing Starte ed Cable Installation Before e the installatio on and use, ple ease read carefully the relevvant content in n “Warning and Sa afety instructio ons”. Take out o the TV from m the wrapping g package and d put it in a dra rafty and flat place. NOTE: Whe en you plug or unplug the po ower cable, yo ou must make sure that the TV, T computer or otther equipmen nt have been already a shut down. When unplugging the power cab ble or signal ca able, please ho old the plug (the insulated he cable.
Gettiing Starte ed Using the Remote C Control When using the rem mote control, aim it at remote e sensor on th he television. If I there is an object between the rremote contro ol and the remo ote sensor on the unit, the unit u may not operate. • Pointt the remote co ontrol at the REMOTE R SENSOR located o on the televisiion. • When n using this television in a very brightly lit area, the infra ared REMOTE E CONTROL SENSOR may nott work properlyy.
Remote Control The buttons of the original remote control are as following: 1. 2 1 3 5 4 6 7 9 11 10 12 13 2. 3. 8 AUDIO 14 INFO 15 16 4. 5. 6. 17 7. 18 20 19 8. 21 9. 23 22 24 25 26 27 EPG LIST QMENU 10. 11. 28 12. 13. 14. 15. : Power, Press to enter or exit the standby mode. : Press to mute or restore sound. II: Pause (in Media/PVR mode). Press to start time shift function (in DTV mode). : Press to enter the MIX mode in the teletext.
Remote Control 1 2 3 5 7 9 11 4 6 8 10 12 14 13 AUDIO INFO 15 16 17 18 19 20 21 23 22 26 27 24 16. MENU ( ): Press to enter the menu screen for various optional adjustable settings. 17. EXIT ( ): Quit the current interface. 18. ▲/▼/◄/►: Press the direction buttons to select menu options or settings. 19. OK: Select the current item or enter into the function of the menu of the next level. 20. : Goes to NETFLIX homepage. 21. : Goes to YouTube homepage. 22.
Basic Operattion 13
Basic Operation Turning on and off the TV • Turn on the TV Plug the power cord into a suitable power point, then press the POWER ( ) button, on the lower side of the back panel (or on the remote control, making sure to aim it at the sensor at the front of the TV); • Turn off the TV Press the button on the remote control to enter standby mode. To power down the TV completely, unplugs the power cord from the mains socket. Do not leave your set in standby mode for long periods of time.
Basic Operation • Select the antenna type Press the ▲/▼ buttons to select the tuning modes and then press the OK button. (For more detailed information, please refer to Channel menu → Auto Tuning). Press the ► button to go to the next step. Press the ◄ button to go to previous step. • The TV starts Auto Tuning. NOTE: If the TV doesn't receive any channels, please check your aerial connection or the country you selected, and then try an auto search again.
Menu Operation How to Navigate Menus Before using the TV follow the steps below to learn how to navigate the menu in order to select and adjust different functions. The access step may differ depending on the selected menu. 1. Press the MENU ( ) button to display the main menu. 2. Press the▲/▼button to select the desired sub item. 3. Press the OK or ► button to access the menu of the next level. 4. Press the BACK( ) button to return to the previous menu. 5. Press the EXIT ( ) button exit from the menu.
Menu Operation Configuring the Channel Menu • Auto tuning: Press the OK button to enter sub-menu. – Tune Type: Press the ▲/▼ button to select tune type: Channel DTV+ATV, DTV, ATV. Auto Tuning – Country: Press the ▲/▼ button to select country. DTV Manual Tuning – Service Type: Select the service type to search. ATV Manual Tuning – LCN: Select the LCN functions On or Off. Dynamic Rescan – Search: Press the OK/► button to start the auto Channel Edit searching.
Menu Operation 19 Skip: Press the BLUE button to skip the channel. (Your TV set will skip the channel to view the channels.) automatically when using • Signal Information (In DTV mode): Display the current Signal Information. Configuring the Picture Menu • Picture Mode: You can select the type of picture which best corresponds to your viewing requirements. Contrast, Brightness, Color, Sharpness, Tint (NTSC) and Backlight can be adjusted when the picture mode is set to User.
Menu Operation Configuring the Sound Menu • Sound Mode: You can select a sound mode to suit your personal preferences. Seven-stage equalization sound can be adjusted when the sound mode is set to User. - Surround Sound: Press ▲/▼ buttons to select Surround Sound, you can select Off, Low, Sound Setting / Middle, and High. - Dialog Enhancer: Press ▲/▼ buttons to select Sound Mode Standard Dialog Enhancer, you can select Off, Low, Middle, and Balance 0 High.
Menu Operation Network Function Operation Instruction You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection. Connecting to a Wired Network • You can attach your TV to your LAN using cable in three ways: You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5 cable. See the diagram below.
Menu Operation Wired Network Setup – How to set up automatically (Wired) Use the Automatic Network Setup when connecting your TV to a network that supports DHCP. 1. Connect your TV to your LAN as described in the previous section. 2. Turn on your TV, press the MENU ( ) button on your remote, use the ▲/▼ buttons to select Network. 3. Press the OK or ► button to enter. Then press Network Setting / the ▲/▼ button to select Wired. MAC:00:e4:00:0c:86:94 4. Select IPv4 or IPv6.
Menu Operation Connecting to a Wireless Network You can connect your TV to your LAN through a standard wireless router or modem. The Modem Port on the Wall WirelessIPsharer (AP having DHCP server) TV LAN Cable Wireless Network Configuration Most wireless network systems incorporate a security system that requires devices that access the network through an access point or wireless router (typically a wireless IP Sharer) to transmit an encrypted security code called an access key.
Menu Operation If Your TV Fails to Connect to the Internet： • Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access. As your TV has a different MAC address, your ISP can not authenticate its MAC address, and your TV can not connect.
Menu Operation • HDMI EDID (In HDMI mode): Switch EDID Version, Select Enhanced when source signal is transferred by HDMI2.0 specification (for 4K content, such as 4K media player, 4K DVD player) and Select Standard when source signal is transferred by HDMI1.4 specification (for HD FHD content). • Environment: You can select Home or Store for the TV environment. It is recommended to set the TV to Home Mode. • Restore Factory Default: Restore the system settings to the factory default.
Menu Operation There are two types of recording: Instant Recording and Schedule Recording.
Menu Operation Instant Recording can record the current TV programmes, while Schedule Recording can start at a specified time and record the TV programmes automatically on the day, time and duration you choose. – Instant Recording Select the channel you want, then press (RECORD) button on the remote control to start recording. A menu will come up on the screen when TV start recording. 00:07 Press (RECORD) button to minimize the information bar at the bottom of the screen.
Menu Operation Press the ▲/▼ buttons to select the Record list. Use the ▲/▼ buttons to select a recorded file and press OK to start playback in full screen mode. Press the RED button to delete the file you no longer require. Press the MENU ( ) button to return to the previous menu. Option2: Also you can play the recorded programmes in Media mode. Press SOURCE ( ) button to enter the Smart Home interface. Use the ◄/► buttons to select Media, and then press OK.
Menu Operation For large file sizes and large capacity storage devices, the loading speed may be longer. The recognition speed of a USB storage device may vary depending on the device. When connecting or disconnecting the USB storage device, ensure the TV is not in USB mode, otherwise the USB device or the files stored in it may be damaged. Configuring the Lock Menu • Lock System: The feature can prevent unauthorized operating the TV set, unless entering 4-digit password.
Menu Operation Configuring the Timer Menu • Auto Sync.: If set it to ON, the TV will sync the local clock according to the DTV broadcasting time automatically. • Time Zone: Display your time zone Timer • Clock: Display either the DTV signal stream time or set the time manually. Time Zone • Sleep Timer: Sleep Timer switches the TV to standby after a defined period of time. To cancel the Sleep Timer, set to "Off ". • Auto Sleep: Select the Auto Sleep time you want.
Menu Operation PROGRAMME GUIDE (In DTV mode) Press EPG button to display the Programme Guide menu. This function let you know the detailed information of the channel, indicating the time of the program playing. From the PROGRAMME GUIDE it is possible to check the program information for the next eight days (If the information is available from the broadcaster). Press EXIT ( ) button to exit. 05/12/2012 09:54 EPG Channel: Press the green button to display the 1/1 Channel list.
Menu Operation Q.MENU Press Q.MENU button on the remote control to display the quick menu. Press ▲/▼ to select the items, and press the OK/► button; then press ▲/▼ buttons to adjust. (Options: Picture Mode, Sound Mode, Sleep Timer, Aspect Ratio, Sports Mode, Subtitle Languages, etc…) Press Q.MENU button to exit.
Home Page Smart Home Operation Introduction Home is an entry interface for all the other functions, which could enter from this interface layer by layer. Via using home menu function, different needs of users could be met, making them fully enjoy video and audio effects brought by the machine. Press SOURCE ( ) button to open home interface, as shown in the following figure. Press arrow buttons to cyclically select all options. Press OK button to enter a small window for selection.
Home Page Main Operating Interface Media /USB 1/ 1/2 Video Photo Music Up Folder System Volume 5327 5502 5505 6308 6369 Android externaldisk MUSIC PHOTO Video Tek.png 86-016.png 86-017.png 86-018.png 86-019.png 86-020.png Files Exit ■ Basic operation 1. Press ▲/▼ buttons to cyclically select Files, Music, Photo and Video in the USB main menu. 2. Use the arrow buttons to highlight the folder, and then press the OK button. 3. Use the arrow buttons to highlight the Music /Photo/ Video.
Home Page • Music Play Console Press the up key to enter the music player console, press the up / down key to select the control button repeatedly, and press the OK key to perform the functions of the selected key. To close the play console, please press the BACK ( ) key. 1. Stop: Stop play the music. 2. Setting: To enter the music play setting menu. 3. Info: Music information. 4. LRC: To switch between the lyrics synchronization and play list. 5. Play Mode: Select the different play mode. 6.
Home Page ■ Video Files When entering “Media”→“Video”, follow the above operation modes to start playing video files. 1. During the normal play process, press and hold the left / right key for rewind / fast forward play. 2. Press the up key to recall the video play console. 3. Press the MENU ( ) key to recall the play setting menu. Press the BACK ( return to the status before video play.
Home Page Applications Press SOURCE ( ) button on the remote to display the home main interface. Then use the Arrow buttons to select the desired APP and press OK button to view. Or press the hotkey on the remote control to enter the desired APP directly. ■ Netflix Sign in to your Netflix® account to browse by genre, search for titles, manage your Instant Queue and review Netflix® recommendations all from you TV.
Teletext Using the teletext feature • Display teletext 1. Select a TV station with a teletext signal. 2. Press the button to enter teletext mode. 3. Press the button to enter Mix mode, this function enables you to superimpose the teletext page over the TV program. 4. Press the button 2nd return or exit to the normal ATV/DTV mode. • Page selection 1. Enter the page number (three digits) using the number buttons.
Troubleshooting Guide Troubleshooting Before contact the service technician, perform the following simple checks. If any program still persists, unplug the TV and calling for serving. PROBLEM POSSIBLE SOLUTION - Check whether the main plug has been connected to a wall let. No sound and picture - Check the picture contrast and brightness settings.
Troubleshooting Guide Maintenance Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the screen 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then used it to wipe the screen.
