User Manual

Menu Operation



 Connecting to a Wireless Network

You can connect your TV to your LAN through a standard wireless router or modem.

Most wireless network systems incorporate a security system that requires devices

that access the network through an access point or wireless router (typically a

wireless IP Sharer) to transmit an encrypted security code called an access key.

Wireless Network Setup

– How to set up Wifi

1. Turn on your TV, press the MENU ( ) button on your remote, use the ▲/▼

buttons to select Network, and then press the OK or ► button to enter

Connection Type.

2. Press the ▲/▼ button to select Wifi. Then press the OK button to enter the

menu of the next level.

3. The Network function searches for available wireless networks. When done, it

displays a list of the available networks. In the list of networks, press the ▲/▼

button to select a network, and then press the OK button.

4. On the Please Enter screen, enter your network’s Password. To enter the

Password, follow these general directions:

Press the OK button to display the keyboard at the screen.

Use the direction buttons to select the and press OK to cycles through lower

case, upper case.

Use the direction buttons to select a letter, special symbols or number, move to

the letter, special symbols or number, and then press the OK button.

To delete the last letter or number you entered, Use the direction buttons to

select and press OK. Press EXIT ( ) to close the keyboard.

5. Input the correct Password and select the Connect and press the OK button to

connect the network.

■ Add: You can also add a WiFi network manually by selecting Add others.

Press ▲/▼buttons to select Add, then press OK button, follow the displayed

messages below the menu to input the network name, encryption mode and network

password, and then press▲/▼buttons to select “Connect”, the system starts to

search wireless routing and connect. When the network is connected, the current

wireless network will be added into the list of wireless networks.

■ WOW: Switch the WOW on or off.

Wireless Network Configuration

The Modem Port on the Wall

WirelessIPsharer

(AP having DHCP server)

LAN Cable