Table of contents Package contents ......................................................................................... 1 Warning ...................................................................................................... 1 Safety instructions ....................................................................................... 5 After use ...................................................................................................... 7 Getting started................................
Warning DEAR CUSTOMER: Before operating, please read all these safety and operating instructions completely and then retain this manual for future reference. Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
Warning IMPORTANT WARNINGS AND CAUTIONS! Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. 1.
Warning 10. The MAINS plug of the apparatus is used as the disconnect device, the disconnect device shall remain readily operable. 11. Wall mounting --- When mounting the product on a wall, be sure to install the product according to the method recommended by the manufacturer. This is a safety feature. 12. Stand --- Do not place the product on an unstable trolley, stand, tripod or table.
Safety Instructions IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 5. Do not use this apparatus near water. 8. Do not install near any heat source such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 6. Clean only with a dry cloth. 9.
Safety Instructions 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 11. Only use the attachments / accessories specified by the manufacturer. 14. Refer all servicing to qualified service personnel.
Intended use of the product This is a consumer electronics device. It is used to receive TV via an antenna or cable TV network and to play back multimedia files from the Internet and USB mass storage devices. It may only be used for private purposes and not for industrial or commercial applications. It is not intended for medical, life-saving or life-preserving applications.
Storage when not in use If you do not plan to use the device for an extended period of time, ensure you follow the below steps Powering off To power the TV off, press and hold the button on the remote control until the TV shows a message on the screen asking for your confirmation to Power Off. Press OK to close all the open apps and shut down the TV. Then unplug the power cord from the socket and remove the batteries from the remote control.
This mains socket must be easily accessible so that the mains plug can be removed immediately in the event of an emergency. Fitting the batteries into the remote control 1. Turn the remote control over with the back facing upwards, put thumb on the top of the battery cover where it has a triangle sign. Push down gently and pull down the cover out of the position. 2. Insert the batteries supplied into the remote control.
Controls and connections Caution: Before connecting or disconnecting any cables, switch off all related devices (also the TV). Otherwise you could damage the devices. Power button HDMI1(ARC) 1.LAN: Network port 2.HDMI ports 3.Antenna socket 4.USB 2.0 port 5.AV IN( require a mini AV cable which is in accessory bag) 6.Headphone out 7.
Remote control Definition of the buttons on remote control: Buttons Description Power Turn on/off Mute Mute or restore sound Media Control media playback in Media mode Number Number buttons Info Display program information EPG Launch Electronic Program Guide Settings Display System Settings Menu Source Select signal source Power Number Info Settings Back Voice EPG Source Direction/ OK Press the direction buttons to Direction/ highlight menu options or settings.
Color Use in accordance with the Operation interface instructions Audio Select audio languages and Audio channels Subtitle Select subtitle TTX Show or hide Teletext . Connecting antenna, Internet and external devices Connecting the TV antenna or cable TV You can connect the cable from your indoor or outdoor antenna or cable TV to the antenna socket. Connecting the network cable (LAN connection) You can also establish an internet connection via WiFi.
Connecting USB device The TV has USB 2.0 ports for connection with appropriate mass storage devices. Connecting an external device with AV output Connect external devices via the AV IN jack directly to TV by using a Mini AV cable. In order to play the audio and video signal fed in from the external device on the TV, Press source button and select the signal source “AV”. Connecting a digital audio system You can connect your TV set to a digital audio system.
Initial Setup The first time you switch on the TV, the Welcome screen appears, which guides you through the initial setup process. Follow the on-screen instructions to finish the initial setup process such as selecting the correct language, country, connecting to the network, scanning channels, and more. Some of the initial setup steps are optional and you can choose to ‘Skip’ them if you wish. If you skip a step, you can perform the setup later from the settings menu.
Adjusting Volume Volume control: press +/- buttons on the remote control to increase or decrease the volume. Sound mute: press the button to temporarily mute the sound. Press this button again or the + button to restore the sound. Basic TV instructions Installing Channels This section describes how to search and store channels automatically.
Accessing Smart TV Homepage -Press home button on the remote control to display the homepage. -To quit homepage, press input source button to access TV and other input mode. The homepage allows you to enjoy Internet Applications (Apps) and specially adapted Internet websites, and perform system settings for your TV. You can make controlling with the TV remote control. -Press ▲/▼/ / and OK to enter the desired Apps, functions or settings.
Help function The Help function offers a lot of information about your TV operation. home button and then use the arrow and OK buttons To use the Help function, Press to select “+” symbol to add help app to favourite bar. commitment is to ensure we do everything possible to assist our This Help function explains how to use this TV. Additionally, you can also refer to the Setup Guide for descriptions about TV installation, and the Reference Guide for parts descriptions and specifications of this TV.
PVR(Personal Video Recorder) PVR allows you to record your favorite TV program. Before you use the function, connect a USB drive to the TV USB socket. Press menu button on the remote control and press ▼ down arrow to select Record. -Record List (To watch or delete recorded content) All recorded programs will show on the list, to playback, select the file and press OK to play. Press yellow color button to delete a file and press blue color button to show file information.
Bluetooth audio streaming. If you face interruptions in audio reception, you should restart your Bluetooth device to find frequency with less interferences and if you continue to face issues you should move closer to TV or increase space between TV and source of interferences. HDMI ARC Function Please note only HDMI1 can support HDMI ARC function. To active the function, Press menu, settings, device preferences, input, then turn on the HDMI control function.
Trouble-shooting You can solve most common problems yourself using the solutions below. If the problem persists after checking the suggested solutions, please contact CHiQ customer care 1300796688. General problems The TV set will not switch on or stop responding. • Plug the power cable of the TV set into a working mains socket. • Replace the batteries in the remote control. • Unplug the plug of the power cable from the mains socket, wait approx. 30 seconds and plug the power cable back in.
TV reception problems No picture / No Signal • Did you select ‘Australia’ as the country while setting up? If not, you may have to do a factory reset on the TV by making sure correct country selection is made this time .
Problems with online services (Smart TV) If you are using a cable network connection (LAN) • Check that the network cable is properly connected. • Check whether the network cable is damaged. • Check whether you can access the internet from another device on the network. • It is possible that the server for the selected service is temporarily down. • Check the network settings on the TV set. If you are using a wireless network • CHiQ Android TVs can connect to 2.4 GHz networks only.