User Manual

• Select the antenna type

Press the buttons to select the tuning modes and then press the OK button.

(For more detailed information, please refer to Channel menu → Auto Tuning).

Press the ► button to go to the next step. Press the ◄ button to go to previous step.

•

The TV starts Auto Tuning.

NOTE:

 If the TV doesn't receive any channels, please check your aerial connection or the

country you selected, and then try an auto search again.

 If the TV just receives some of the channels, it means the aerial's reception isn't good

enough and an antenna service is recommended.

Programme Selection

• Using the / on the panel of TV or on the remote control.

Press P ∧ to increase channel number.

Press P ∨ to decrease channel number.

Volume Adjustment

• Press the +/- on the panel of TV or + - on the remote control to adjust the volume.

• If you want to switch the sound OFF, press the

• You can release mute by pressing the

or increase the volume.

Changing the Input Source

1. You can select the input source by pressing the SOURCE ( ) button on the remote

control.

2. Press the arrow button to cycle through the input source, and press the OK button to

confirm your choice.

▲/▼

∧

∨

Using 0- 9 Digital Buttons.

You can select the channel number by pressing 0 to 9. Example:

To select - channel (e.g. Channel 5): Press 5.

To select -- channel (e.g. Channel 20): Press 2 and 0 in a short time.

•

Basic Operation