Use and Care Manual

To ensure the longevity of your furniture please ensure you follow the guidelines below:
- Respect the maximum weights indicated on the assembly manual;
- Avoid exposing the product to direct sunlight. Over time the product may "discolor" or become yellow when
exposed to prolonged period of direct sunlight;
- Always assemble/Install the furniture in a covered and enclosed environment;
- Avoid contact with moisture. Do not place damp or wet towels on the product;
- In the event liquid spills on the furniture, dry immediately;
- For cleaning use a soft moistened cloth with mild soap and water, followed by a dry cloth. Do not use any chemicals
or abrasive products for cleaning. As they will damage the products finish;
- Prevent that acidic substances (i.e. - salt, vinegar, lemon ...) get in contact with your furniture;
- We recommend lining the shelve (s) in the areas of greatest friction with smooth plastic;
- If you need to move your furniture, always LIFT the product. Do not drag;
- Do not climb on the furniture as this was not designed for such weight;
- Do not use box cutters or sharp objects on the product;
- Do not strain or lean on doors and drawers, if included on your product;
- The product disassembly and reassembly is not recommended, since this will reduce the efficiency of the cabinet
fixtures.
- Carefully follow all the installation instructions;
- The installation should be done in a clean and flat surface. We recommend that you use the cardboard packing to
line the floor;
- Upon opening, verify that the quantities of all parts and accessories are in accordance with the assembly manual;
- Carefully compare the holes of each piece with the illustration of the manual;
- Use the tools indicated. Only USE electric screwdriver IF YOU HAVE proper knowledge and skill. The inappropriate
use can damage parts or accessories;
- If the product requires installation on the wall, be careful to not hit in wiring and pipes while drilling;
- Uneven or irregular floors compromise the stability and the squaring of the product;
WE WOULD LIKE TO FOR YOUR RECENT PURCHASE FROM POLIFURNITURE. WE WORK VERY
HARD TO ENSURE THAT ALL OUR PRODUCTS FOLLOW ONLY THE HIGHEST STANDARDS.
THANK YOU
IF YOU NEED ASSISTANCE IN ASSEMBLY, HAVE DAMAGED OR MISSING PARTS – PLEASE CONTACT US DIRECTLY
E-MAIL – / TEL - 1-800-616-2516 (10AM-4PM EST.)
PLEASE INCLUDE THE PRODUCT NAME AND REFERENCE NUMBER AND A BRIEF EXPLANATION OF THE
PROBLEM YOU ARE HAVING SO WE CAN PROPERLY AND PROMPTLY ASSIST YOU
PLEASE ALLOW FOR 24-48 HOURS FOR A SERVICE REPRESENTATIVE TO CONTACT YOU
PLEASE ENSURE THAT YOU INCLUDE CONTACT INFORMATION
PLEASE VISIT OUR WEBSITE FOR OUR LIBRARY OF ASSEMBLY VIDEOS –
[e-mail]
WWW.POLIFURNITURE.COM/POLIMONT
Rev 03
To erase the numbers printed on the pieces, use the eraser included in the
accessories pack.
4
CLEANING AND CARE
ASSEMBLY GUIDELINES