® CHLOR*RID Product Information CHLOR*RID International, Inc. P.O. Box 908 Chandler, AZ 85244 800-422-3217 480-821-0039 fax 480-821-0364 www.chlor-rid.com Email: info@chlor-rid.
The protective coating industry and corrosion engineers are now more aware of the damage soluble salt contaminants cause than ever before. T esting for chlorides and sulfates, both qualitative and quantitative methods, is common — and the threshold for acceptable levels is dropping. CHLOR*RID can satisfy your most aggressive requirements — simply, safely and economically. It is effective on most surfaces, including steel, foam, concrete and plastics.
CHLOR*RID removes chlorides and sulfates from contaminated surfaces in a simple dilution with any potable water source. CHLOR*RID is biodegradable, non-flammable and contains no volatile organic compounds. Laboratory and field tests confirm that CHLOR*RID is effective for removing chlorides and sulfates from industrial surfaces.
I OR*RID is a product that has no equal in the t is internationally recognized that CHL CHLOR*RID OR*RID removal of soluble salts. CHL CHLOR*RID OR*RID’s innovative technology and proven performance provided, not only the U.S. Government but also foreign governments, a reason to issue Letters of Patent for this unique product. The Permite Corporation tested CHLOR*RID with several of their coating systems, including Grip-Tite Epoxy Primer, Permox Epoxy, Permox Type II Epoxy and PCS-865 Epoxy Novalac.
After a one year testing program in an Atlas Cell, the following remark was made: “The following coating system was applied to our recommended film thickness for immersion service on Atlas Cell Plates that were contaminated with a brine solution for one week and then decontaminated by hand scrubbing with a CHLOR*RID solution. Tnemec Company is conducting long-term tests using CHLOR*RID in conjunction with two high-performance coating systems in their laboratory.
Specifications Recommended for use on • • • • • • • • • • • • • • • • • Bridge Structures Ships Mining Facilities Storage Tanks Public Utilities Electronics Offshore Drilling Rigs Marine Structures Process Equipment Pulp and Paper Mills Power Generation Plants Natural Gas Facilities Saw Mills Petrochemical Installations Piping Cooling Towers and More • Color: Blue-Green • Typical coverage: 300 - 1000 square feet per U.S. gallon • No VOCs • pH 3.3 (+/– .2) • Packaging: 1/5/55 U.S. Gal. - 4/20/220 Ltr.
directions are general and may require alterations to better suit individual conditions. Call CHLOR*RID International Inc. for recommendations for a specific project. CHLOR*RID International Inc. assumes no liability for use or misuse of the product inconsistent with its labeling. HAND WASHING: Use CHLOR*RID DTSTM (Direct To Surface) according to directions. CHLOR*RID DTS is ready to use direct from the container – no dilution necessary. WET ABRASIVE BLASTING: Add CHLOR*RID to the system at 1 U.S.
CHLOR*RID ® LIQUID SOLUBLE SALT REMOVER DATA SHEET DESCRIPTION: CHLOR*RID is an organic bonding chemical blend which aids in the removal of chlorides, sulfates and surface reacted salts. Contains no volatile organic compounds (VOC’s), and is biodegradable.
CHLOR*RID ® LIQUID SOLUBLE SALT REMOVER DIRECTIONS DESCRIPTION: CHLOR*RID is a unique organic bonding chemistry which aids in the removal of chlorides, sulfates and surface reacted salts. HIGH PRESSURE WASHING: CHLOR*RID is added to the water of the pressure washer, usually in a dilution ratio of 1:100. The dilution ratio is dependent on the contamination level and the water quality. (See Testing below) Add CHLOR*RID by means of a metering pump or add to a reservoir water supply.
CHLOR*RID ® LIQUID SOLUBLE SALT REMOVER Specifications Guide for CHLOR*RID ® CHLOR*RID can be used in several different ways, dependent upon which method of surface preparation is used. Typically, water is used as the delivery vehicle. Though a minimum of 3000 psi is recommended, there is no prescribed maximum. There also is no upper limit established for water temperature. Temperatures usual to waterjetting and steam cleaning applications are satisfactory.
CHLOR*RID ® LIQUID SOLUBLE SALT REMOVER Material Specification Soluble salt remover: Soluble salt remover is to be CHLOR*RID ® or approved equal. The soluble salt remover shall meet the following specification: • pH shall be 3.3 (+/- .
CHLOR*RID ® SPECIFICATION “A” *DRY ABRASIVE BLAST-PRESSURE WASH* A). Abrasive blast the entire surface to be coated to a (insert blast standard) finish. Pressure wash the entire surface with a minimum of 3000 psi. The wash water is to be of potable quality and CHLOR*RID is to be added by means of a pressure pump or injector capable of overcoming the inlet line pressure, or from a pre-mixed holding tank. This is necessary to assure the introduction of the CHLOR*RID chemistry.
CHLOR*RID ® SPECIFICATION “B” *DRY BLAST-PRESSURE WASH-DRY BLAST* B). Abrasive blast the entire area to be coated with a sweep blast (insert blast standard) to remove all delaminated coating, corrosion byproducts or other barrier materials. Barrier deposits left behind will form a mask over the salts and will prevent their removal. After sweep blasting procedures are completed, pressure wash the entire surface with a minimum of 3000 psi.
CHLOR*RID ® SPECIFICATION “C” WET ABRASIVE BLAST* C). To the standard abrasive nozzle, add a water ring intended for wet abrasive blasting or use a nozzle specifically designed for that purpose. Water is to be supplied to the water ring or comparable equipment as per the manufacturers recommendation. The blast water is to be of potable quality and CHLOR*RID is to be added by means of a pressure pump or injector capable of overcoming the inlet line pressure, or from a pre-mixed holding tank.
CHLOR*RID ® SPECIFICATION “D” *HIGH-PRESSURE WASH-DRY ABRASIVE BLAST* D). Pressure wash with a minimum of (specify psi standard if different) 10,00 psi. The wash water is to be of potable quality and CHLOR*RID is to be added by means of a pressure pump or injector capable of overcoming the inlet line pressure, or from a premixed holding tank. This is necessary to assure the introduction of the CHLOR*RID chemistry.
CHLOR*RID ® SPECIFICATION “E” *HIGH-PRESSURE OR ULTRA HIGH PRESSURE WATER JET* E). High pressure water jet or ultra high pressure water jet with a high pressure washer at a minimum of (specify psi). The wash water is to be of potable quality and CHLOR*RID is to be added by means of a pressure pump or injector capable of overcoming the inlet line pressure, or from a pre-mixed holding tank. This is necessary to assure the introduction of the CHLOR*RID chemistry.
CHLOR*RID ® SPECIFICATION “F” *HAND WASHING* F). Hand washing is to be done for contaminate removal in areas of spot repair or areas very small in size. Any loosely adhered paint, rust scale, corrosion deposits or other barrier material is to be removed first. This is to be done by means of abrasive blast to (insert specification) or by hand or power tools as per (insert specification). Apply CHLOR*RID DTS (Direct To surface) material sufficient to wet out the entire surface.
CHLOR*RID ® SPECIFICATION “G” *PRESSURE WASH - CONCRETE, W/WO DRY ABRASIVE BLAST* G). Abrasive blast the entire surface to be coated to a (insert blast standard) finish. (If abrasive blast is not desired, delete the first sentence.). Pressure wash with a minimum of 3000 psi. The wash water is to be of potable quality and CHLOR*RID is to be added by means of a pressure pump or injector capable of overcoming the inlet line pressure, or from a pre-mixed holding tank.
CHLOR*RID STRUCTURAL ™ CHLOR*RID STRUCTURAL aids in the removal of chlorides, sulfates, nitrates and other problematic soluble salts. CHLOR*RID STRUCTURAL is biodegradable, all organic, non- hazardous and contains no VOCs. CHLOR*RID STRUCTURAL is easy to use, economical, effective, and requires no special equipment. The easiest and most economical way to remove soluble salt contaminantschemically engineered to provide excellent performance for atmospheric service.
CHLOR*RID STRUCTURAL™ Liquid Salt Remover Provides Enhanced Adhesion Excellent Salt Removal Economical Proven Performance Environmentally and User Friendly CHLOR*RID STRUCTURAL is specially formulated for atmospheric service and is more economical than multiple water washes. ~ All Organic ~ Non-hazardous ~ Biodegradable ~ CHLOR RID International Inc 800.422.3217 www.chlor-rid.com 480.821.0039 info@chlor-rid.
CHLOR*RID STRUCTURAL™ LIQUID SOLUBLE SALT REMOVER DATA SHEET DESCRIPTION: CHLOR*RID STRUCTURAL is a chemically engineered to aid in the removal of chlorides, sulfates, nitrates and surface reacted salts. Contains no volatile organic compounds (VOC’s), and is biodegradable. CHLOR*RID STRUCTURAL is recommended for use as part of surface preparation prior to application of primers or coatings on a variety of surfaces, including ferrous and non-ferrous metals, concrete, wood, plastics and others.
CHLOR*RID STRUCTURALTM LIQUID SOLUBLE SALT REMOVER DIRECTIONS DESCRIPTION: CHLOR*RID STRUCTURAL is chemically engineered to aid in the removal of salts from surfaces intended for atmospheric service. It is commonly used as part of surface preparation prior to applying protective coatings, but it is also used for surface decontamination of uncoated surfaces. For marine, immersion service and non-ferrous metals use original CHLOR*RID concentrate.
CHLOR*RID DTS Data Sheet (Direct To Surface) TM DESCRIPTION: CHLOR*RID DTS is a ready to use organic bonding chemical blend which aids in the removal of chlorides, sulfates and most other soluble salts; contains no volatile organic compounds ( VOC's), and is biodegradable. USES: CHLOR*RID DTS is recommended as a wash solution prior to application of primers or coatings on a variety of surfaces, including ferrous and nonferrous metals, concrete, wood, plastics and others. For a full list contact Mfg.
CHLOR*RID DTS (Direct To Surface) Directions TM The use of this product is extremely easy and it is quite effective at removing soluble salts, but the directions must be followed closely. This product is not intended to be a degreaser. Any grease or oil film should be removed first. This product is intended for use in surface preparation for atmospheric service coatings. There are just three easy steps. Step 1. Remove Barrier Soluble salts adhere themselves to the substrate.
CHLOR*WASH ™ • Specially formulated to wash all surfaces of salt and dirt. • Maximum performance yet is safe to the environment. • For use in pressure washers and hand washing applications. • Performance chemical blend designed to remove road film, dirt, de-icing salts, marine salts & acid rain residue.
CHLOR*RID International, Inc. P.O. Box 908 Chandler, AZ 85244 Toll Free 800-422-3217 Office 480-821-0039 Fax 480-821-0364 www.chlor-rid.com DIRECTIONS CHLOR*WASH MULTI-PURPOSE CLEANER & SALT REMOVER DESCRIPTION: CHLOR*WASH is an organic bonding chemical blend which aids in the removal of road films, dirt, and chloride, sulfate and nitrate salts. It contains no volatile organic compounds (VOC) and is non- flammable. CHLOR*WASH is biodegradable and therefore is an integral part of a sustainable environment.
CHLOR*RID International, Inc. P.O. Box 908 Chandler, AZ 85244 Toll Free 800-422-3217 Office 480-821-0039 Fax 480-821-0364 www.chlor-rid.com DATA SHEET CHLOR*WASH MULTI-PURPOSE CLEANER & SALT REMOVER DESCRIPTION: CHLOR*WASH is an organic bonding chemical blend which aids in the removal of road films, dirt, and chloride, sulfate and nitrate salts. It contains no volatile organic compounds (VOC) and is nonflammable. CHLOR*WASH is biodegradable and therefore is an integral part of a sustainable environment.
CHLOR*RID International, Inc. P.O. Box 908 Chandler, AZ 85244 Toll Free 800-422-3217 Office 480-821-0039 Fax 480-821-0364 www.chlor-rid.com HOLD*BLASTTM Surface Passivator DIRECTIONS The use of this product is to prevent flash rust through surface passivation. Apply HOLD*BLASTTM in a dilution of 1:50 with potable water directly onto the substrate (1 part HOLD*BLAST to 50 parts water). Sufficient product must be applied uniformly across the substrate to thoroughly wash the surface, with no areas missed.
CHLOR*RID International, Inc. P.O. Box 908 Chandler, AZ 85244 Toll Free 800-422-3217 Office 480-821-0039 Fax 480-821-0364 www.chlor-rid.com HOLD*BLASTTM Surface Passivator Data Sheet BENEFIT: As a surface passivator, HOLD*BLAST chemically changes the active surface of metal to a much less reactive state. Surface corrosion can occur when water wet surfaces react with atmospheric oxygen. This often results in the formation of flash rust, which can be eliminated with the use of HOLD*BLAST.
An easier to use, more accurate field test for chloride contamination
Revolutionizing the Industry! F ield Testing for chlorides by both qualitative and quantitative methods, is common and the threshold for acceptable levels is dropping, but the cumbersome methods for testing have remained the same – until now! CHL OR*TESTTM – the new way to perform field CHLOR*TEST testing — revolutionizing the industry! CHLOR*TESTTM is so complete and easy to use that even the least experienced inspector can get accurate results.
A Testing Process As Easy As 1 - 2 - 3! 1 Empty the entire contents of the CHLOR*EXTRACTTM container into the CHLOR*SLEEVETM. Peel off the protective backing, pinch the sleeve to expel some of the air and adhere the sleeve to the surface to be tested. 2 Massage the extract against the surface; then peel the sleeve off the surface and place it in the perforated hole in the box lid. 3 Snap the sealed ends off the glass tube, insert it into the sleeve and down into the extract.
(Chloride Ion T est for Abrasives) Test An easy to use, accurate field test for chloride contamination of abrasives
Prevent coating failure before you cause it! Many coatings have failed from chlorides deposited on a surface by contaminated abrasive. Finally, there is a test that you can do in the field in minutes! No more sending samples to a laboratory; no waiting days for results; no high cost. CHLOR*TEST TM “A” is the only complete and easy to use abrasive test kit – even the least experienced tester can get accurate results.
(Chloride Ion T est for W ater/Liquids) Test Water/Liquids) An easy to use, accurate field test for chloride contamination
Is your wash water contaminated with chlorides? Many coatings have failed from chlorides deposited on a surface by contaminated water. Finally, there is a test that you can do in the field in minutes! No more sending samples to a laboratory; no waiting days for results; no high cost. CHLOR*TESTTM “W” is a complete, ready to use test kit. Even an inexperienced person can accurately measure chloride levels.
