Instruction manual

About the Operating Instructions
Chloride Linear Plus Series Rack-mount UPS User Instruction Manual 4
Conformity is established through compliance with the following standards:
• EN 62040-1-1
• EN 62040-2
Additional information regarding adherence to these directives is included in the appendices NSR and
EMC of the EU Declaration of Conformity.
If required, the EU Declaration of Conformity can be requested from Chloride.
About the
Operating
Instructions
This manual contains information regarding the installation, operation and use of the Uninterruptible
Power Supply (UPS) Linear Plus Rack-mount.
It is advised that this User’s Manual be consulted before installation of the equipment, which operation
shall only be carried out be qualified personnel. Thereafter, it shall be kept and referred to whenever it is
necessary to carry out work on the UPS.
Device Overview The Linear Plus Rack-mount devices are available at various nominal power ratings.
The following table provides an overview of the various versions of the device:
Symbols The following symbols are used in this handbook:
WARNING: indicates instructions which, if not observed, may endanger your life, your health, the
reliability of your device or the security of your data.
NOTE: Indicates additional information and tips.
Documentation
Structure
These instructions can be supplemented with additional sheets, describing, for example, specific
extensions, options or device status.
Preparation for
Use
Delivery
The goods have been checked thoroughly before dispatch. On receipt check the packaging and ensure that
the contents are undamaged. Any damage or missing parts must be reported to the supplier within 8 days
of delivery.
Introduction
Table 1. Overview of UPS devices and batteries (BP = Battery Pack)
Type Designation Order No. Nominal Power
19“ rack-mount UPS
Linear Plus Rack-mount 6 kVA LP061XHR- 6000 VA
Linear Plus Rack-mount 10 kVA LP101XHR- 10000 VA
External Battery Standard External Battery LPBP100-2 NA
Delivery and Storage