User's Manual

Caution in Usage

XP300 User Manual

5. How to use the XP300

■ Presentation mode( )

Open the file for your presentation using PowerPoint.

2. Set the power switch on the transmitter to ON.(The

RED LED will blink.)

3. Set the Mode Selector on the transmitter to

presentation(P/T) Mode.

4. Press the Start or End Slide Show ( ) button on

the transmitter. The slide show starts from the

current slide. Press the Start or End Slide Show

button again to end a slide show.

5. To display the next slide, press the DOWN( )

button. To display the previous slide, press the

UP( ) button.

■ Mouse mode( )

1. Set the power switch on the transmitter to ON.

(The RED LED will blink.)

Set the Mode Selector on the transmitter to Mouse Mode.

3. Sliding your finger across the touch sensor moves

the mouse pointer on the screen in the same

direction. Pushing once performs a left click,

pushing twice performs a double click. Press the

Optical Touch Sensor for 1 sec to activate "Drag" and

push again to release it.

4. " " button has the same functionality as the left

click, " " button has the same functionality as

the right click.

6. Cautions

Use of controls adjustments, or performance of

procedures other than those specified herein

may result in hazardous radiation exposure.

1. Do not stare into laser beam.

2. Do not aim the laser at people.

3. Keep out of reach of children.

4. Any changes or modifications to the controller

could void your authority to operate the

equipment.

5. Do not place the controller in a location where it

is subject to direct sunlight or extreme heat.

6. If any solid object or liquid falls onto the

controller, disconnect it and have it checked by

qualified personnel.

7. When not using the controller, set the power

switch to OFF.