X-pointer Manual ( XPG300Y ) Table of Contents 0. CAUTION 1. Composition & Function 2. Installation 3. The Usage of X-pointer 4. Features 5. The Usage of Magic key 6. Specifications 7. Certification & Regulatory Compliance Information 8. Support 9.
0. CAUTION LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS II LASER PRODUCT. NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY, AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES. MOMENTARY EXPOSURE FROM A LASER POINTER, SUCH AS AN INADVERTENT SWEEP OF THE LIGHT ACROSS A PERSON'S EYES, MAY CAUSE TEMPORARY FLASH BLINDNESS SIMILAR TO THE EFFECT OF A CAMERA FLASH BULB.
“Notice” For accidents caused by user’s carelessness is not compensation. Please keep in mind that the below notice. 1) Do not stare into laser beam. 2) Do not aim the laser at people. 3) Keep out of reach of children. 4) Any changes or modifications to the controller could void your authority to operate the equipment. 5) Do not place the controller in a location where it is subject to direct sunlight or extreme heat.
1.
2. Installation 1) Plug receiver into computer USB port. 2) Wait until LED(ⓙ) of receiver flickers regularly. 3) If LED(ⓙ) of receiver flickers, it means that the product is correctly recognized. 4) Push slide show, task switch or left, right button of transmitter for more than 2 seconds. After stop flickering, recognizing is completed. 5) Open powerpoint and push transmitter’s buttons. And then check [table1]. 6) In case of failure in working [table1], separate receiver from USB port.
3. The Usage of X-pointer 1) Presentation operation ① Open the presentation file. ② Move mode switch(ⓐ), and mode will change into “Image pointer mode”. ③ Run slide show. ④ User can give a presentation effectively as they can move pages with left or right button(ⓑ,ⓒ) of transmitter.
4. Features 1) Magic Key function Magic key allows user to use X-pointer for any program. User can give a presentation and also can remote control media player, acrobat reader, photo viewer, winamp, etc. 2) Optical finger mouse Optical finger mouse has the same functionality as the touchpad of a laptop computer. Optical finger mouse controls offer greater functionality with delicate mouse control. 3) Drawing a line Using “Drag&Drop” in mouse mode, user can draw a line in powerpoint.
5. The Usage of Magic key X-pointer’s function will be changed as user’s demands. User can use X-pointer as a remote control of media player, word, winamp etc. Key values are saved in X-pointer and you can use anywhere. 1) Magic key program can be downloaded from : http://www.x-pointer.com (Download : Home -> support -> Download) 2) Insert receiver into USB port, and then complete awareness of ID. 3) Start -> Program -> ChoisTechnology -> Magic key.
6. Specifications 1) Transmitter Frequency Used 2.430~2.460GHz Channels Used 31 channel Recognizable ID’s 65,536 Operational Distance Max. 50m(Open Field) RF Power less than 10mW Modulation GFSK Operating Temperature 10~40°C Laser Type ClassⅡ Laser Output less than 1mW Laser Wavelength (Color) 515nm(GREEN) Current Consumption less than 20mA Number of Button 4 buttons, 1 slide switch Battery 3.
2) Receiver Interface USB 1.1 / 2.0 Power 5V(USB Power) Operating System Windows 2000, XP, Vista, 7, Mac OS X Consumption Current less than 23mA Operating Temperature -10~50°C Size 26 X 12 X 4.
7. Certification & Regulatory Compliance Information 1) Product Name (Model Name) Transmitter : XPG300Y Receiver : XPR-AT2 2) Certification Number FCC ID : RVBXP300Y 3) Manufacturer / Nation : ChoisTechnology Co., Ltd. / Korea,China 4) Regulatory Compliance FCC Compliance Statement FCC Part 15.19 This device complies with part 15 of the FCC Rules.
Part 15.105 (B) Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation this equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
8. Support If there are some problems or something to improve while using the product, please contact us. We will consult about it kindly. E-mail : inquiry@choistec.com TEL : +82-32-246-3409, FAX : +82-2-6455-3406 Homepage : http://www.x-pointer.com Company Name : ChoisTechnology Co., Ltd. 9. Warranty ChoisTechnology warrants this product to be free from defects in materials and workmanship for one year.