Specifications

2. Installation
1) Plug receiver into computer USB port.
2) Wait until LED(ⓙ) of receiver flickers regularly.
3) If LED(ⓙ) of receiver flickers, it means that the product is correctly recognized.
4) Push slide show, task switch or left, right button of transmitter for more than 2 seconds.
After stop flickering, recognizing is completed.
5) Open powerpoint and push transmitter’s buttons. And then check [table1].
6) In case of failure in working [table1], separate receiver from USB port. And insert receiver into
USB port again. Repeat the process above.