User's Manual

ManualsBrandsChois Technology ManualsElectronics2.4 GHz Wireless Presenter

User Manual (XP350)

Please be sure to read safety precautions. Photos and drawings given in User Manual may differ

from product purchased. Contents in User Manual may vary depending on product versions or

manufacturer’s circumstances, which may change without notice to improve product and/or

performance.

(Using Magic Key)

This product contains a Magic Key receiver and is compatible with all X-pointer models. It can be

used with other X-pointer model transmitters, but requires Magic Key to be installed in order to

recognize other transmitters. “Only one transmitter can be used at a time.”

Cautions

Use of controls adjustments, or performance of procedures other than those specified herein

may result in hazardous radiation exposure.

1. Do not stare into laser beam

2. Do not aim the laser at people

3. Keep out of reach of children

4. Any changes or modifications to the controller could void your authority to operate the

equipment.

5. Do not place the controller in a location where it is subject to direct sunlight or extreme

heat.

6. If any solid object or liquid falls onto the controller, disconnect it and have it checked by

qualified personnel.

7. When not using the Controller, set the power switch to OFF.

8. The Controller is capable of operation between 10°C to 40°C and storage between -10°C to

50°C.

Maintenance and support of product

If there is some problem or something to improve while using the product and users contact us,

we will consult about it kindly.

Company name : Chois Technology Co., Ltd.

Homepage : www.x-pointer.com

E-mail : inquiry@choistec.com

Summary of content (13 pages)

PAGE 1
User Manual (XP350) Please be sure to read safety precautions. Photos and drawings given in User Manual may differ from product purchased. Contents in User Manual may vary depending on product versions or manufacturer’s circumstances, which may change without notice to improve product and/or performance. (Using Magic Key) This product contains a Magic Key receiver and is compatible with all X-pointer models.
PAGE 2
Table of contents 1. Package Contents 2. Features of the XPM Series 3. The usage of Magic Key Application 4. Features in models 5. Setting up the XPM series 6. Transmitter/Receiver Recognition 7. Composition of the XPM series 8. Q&A 9. Problem solution & self inspection 10. Product specification 11.
PAGE 3
-XP350 magic Packages XP350 magic contains Transmitter, Receiver, Pouch, User Manual and Two 1.5v Type AAA Batteries.
PAGE 4
2. Features of the XPM Series - Magic Key Application XPM series with Magic Key has an application installed from a CD or download. It allows users to program any keystroke value for buttons on the presenter. The new values are stored in the USB receiver and don’t need to be re-entered when changing computers. For Mac users, PC commands can be changed to Mac commands and vice versa.
PAGE 5
XP350 magic -Receiving method of the main body of USB receiver(One body type) X-pointer has a very slim USB receiver under the cover of the battery and is very convenient to carry and we minimized the possibility of loss doing so. - Cap to expand the penetration of laser beam(Patent No. 10-2008-0034236. Design patent No.
PAGE 6
3. The usage of Magic Key program 1. Plug XPR-AT receiver into computer USB port. 2. Install Start-Program-Magic Key 3. Select the item to change on the initial screen and click the ‘OK’ button. 4. Enter key values for buttons. Magic Key Download -Magic Key can be downloaded from: www.x-pointer.com (Download: Home-Support-download) 4. Setting up the XPM series 1. Insert two AAA-type batteries. 2. Insert the receiver XPR-AT into USB Port.
PAGE 7
5. Transmitter/Receiver Recognition 1. If correctly recognized by PC, LED on the receiver flickers at one second interval. 2. Push one of the buttons on the transmitter for 2-3 seconds until LED on the receiver stops flickering. 3. If ID is recognized, LED on the receiver turns off, and turns on only when buttons are pushed. 4. Check if mouse pointer moves normally after switching to mouse mode. 5. Check if Page Up/Down works for presentation after switching to keyboard mode. 6.
PAGE 8
1.Optical touch sensor mouse -Moving the mouse pointer.(Users can click the left side if they press it once and they can click the right side if they press it twice continuously. ※Drag & Drop ※ -Drag: If users press the potical touch sensor for 1 second, the function of drag will poerate. -Drop: If users press the potical touch sensor of other button once after activating drag, the function of drag will terminate. 2.
PAGE 9
7. How to use the product of magic series How to store the receiver 1. Users should pull down the battery cover pressing the push button on the cover of the backside of the receiver. 2.Users can store the receiver in the upper storing space of the battery. Presentation mode 1. Users should implement the presentation file. 2. Users should set the power ON/OFF switch on the right side of the receiver to ON. If users turn on the power, the presentation mode will be set automatically. 3.
PAGE 10
-Mouse mode 1.Users should set the mouse mode pressing the mode selection button in the right side of the receiver.(The red LED twinkles.) 2.Users should move the mouse pointer rubbing the potical touch sensor with thumb.(Users can click the left side if they press it once and they can click the right side if they press it twice continusously.) If users press the touch sensor for 1 second, the function fo drag prerates and if they press another button once, the function will disappear. 3.
PAGE 11
well as in MS Powerpoint since Magic Key allows full customization. 9.Problem solution & self inspection 1. Laser does not work Solution : Exchange batteries for new ones, and try it again. (natural discharge) 2 Mouse pointer does not move with the direction button pushed while using mouse function. Solution : For magic series, select Mouse from the slide switch (Mouse, keyboard) on the right side of the product.
PAGE 12
1, Optical touch sensor 1 Battery 1.5V Type AAA×2EA Dimension(Transmitter) 35.7 X 112.7 X 16.8mm Weight(Transmitter) 55g Certificate MIC, KPS XPR-AT Receiver XP350R Input power 5V(USB Power) Operating temperature -10~50°C Compatibility of operation Mac OS Windows 2000, XP, 7 system System IBM PC / AT&Laptop PC Interface USB 1.1/2.0 Dimension(Receiver) 22 X 16 X 6 mm Weight(Receiver) 2g FCC ID: RVBXP350T FCC Part 15.19 This Device complies with part 15 of the FCC Rules.
PAGE 13
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver.