User's Manual

well as in MS Powerpoint since Magic Key allows full customization.

9.Problem solution & self inspection

1. Laser does not work

Solution : Exchange batteries for new ones, and try it again. (natural discharge)

2 Mouse pointer does not move with the direction button pushed while using mouse

function.

Solution : For magic series, select Mouse from the slide switch (Mouse, keyboard) on the right

side of the product.

3 Can the user check whether or not the product was correctly recognized?

Solution : If the receiver lamp flickers when pushing the transmitter button, it means that the

product was correctly recognized.

4 The product is not recognized.

Solution : Check if the lamp flickers after inserting the receiver. If it does not flicker, the

problem may be in USB Port. Try another USB port. If it still doesn’t work, in this case, call

Customer Center.

10. Product specification

Model XP350

Using frequency 2.4GHz ISM(2,405~2,480MHz)

Number of using channel

Distance of using 30m(Open Field)

Antenna power <10mW

Modulation method GFSK

Communication method Simplex(One direction)

Identification ID 65,536

Mouse resolution 800CPI

Operating temperature 10~40°C

Laser standard ClassⅡ

Laser output Below 1mW

Laser wavelength 650nm(RED)

IR cut off filter 808~1,064nm

Buttons Input button 4, Power ON/OFF

switch1, Mode selection 1, Laser