User's Manual

5. Transmitter/Receiver Recognition

1. If correctly recognized by PC, LED on the receiver flickers at one second interval.

2. Push one of the buttons on the transmitter for 2-3 seconds until LED on the receiver stops

flickering.

3. If ID is recognized, LED on the receiver turns off, and turns on only when buttons are

pushed.

4. Check if mouse pointer moves normally after switching to mouse mode.

5. Check if Page Up/Down works for presentation after switching to keyboard mode.

6. If failing to be recognized, try the process above again after removing the receiver from

USB Port.

6. Button composition and function of the Magic series

The transmitter is composed of 4 Programmable input buttons, Clickable optical mouse sensor,

Laser button, Power switch, Mouse/Keyboard mode switch and the receiver is composed of USB

plug.