User Instructions
Table Of Contents
14
/
17
5.
Password setting
①
Set the opening password
————
click the " " key to enter the setting
information list,using“+”key or“-”key select“Password”option,select“
”to
confirm. enter Password option interface,cursor select “Start Password”(Start
Password status is off),and click “
” to confirm , When prompted to enter the
password , using " + " key or " - " key to switch the number " 0 - 9 " , click "
" to
switch the number, confirm the number in the current cursor. after the entry is
completed, the system prompts that the password setting is successful . After the
password setting is successful, the interface automatically jumps to the original
setting interface. Press the " + " key and " - " key at the same time to exit to the
main interface or exit to the main interface through " Back " → " Exit " . operate
The steps are shown as below.
②Cancel the opening password ———— click the " " key to enter
the setting information list,short using " + " key or " - " key to select "
Password " option, click " " to confirm, cursor select“Start Password”
(Start Password status is on),and click“ ”to confirm, When prompted to
enter the old password, using " + " key or the " - " key to switch the
number " 0-9 " , click " " to switch the number , After the input is
completed, the system prompts that the password has been cancelled