Product Info
Table Of Contents
- 1. Brief Introduction
- 2. Technical Specifications
- 4. Description of indicator and press-button
- 5. Definition of DB9 Socket Pin
- 6. Description of Power Supply Condition
- 7. Description of Serial Interconnection
- 8. Instructions
- 9. Configuration Tools
- 10. AT command
- 1. Test command
- 2. Set / Inquire the baud rate
- 3. Set / Inquire the serial communication mode
- 4. Set / Inquire authentication password
- 5. Set/Inquire Name
- 6. Set / Inquire Sniff power-saving mode
- 7. Set / Inquire the parameters of inquiring scan and connecting scan
- 8. Set / Inquire whether authenticate
- 9. Set / Inquire device type
- 10. Set / Inquire device role
- 11. Set / Inquire the data processing mode when not connected
- 12. Set / Inquire flow control mode
- 13. Set / Inquire the type of data device
- 14. Set / Inquire whether it is bind
- 15. Set/Inquire the memorized remoted Bluetooth device
- 16. Clear the memorized address
- 17. Inquire local Bluetooth address
- 18. Inquire software version
- 19. Software reset
- 20. Inquire remoted Bluetooth devices
- 21. Cancel inquire remoted Bluetooth devices
- 22. Restore default settings
- 23. Inquire all commands
- 11. FAQ:
- 1 After powering the module, the indicator of the Module doesn’t blink.
- 2 When there are multiple Bluetooth devices around, how to connect to the specified Bluetooth device?
- 3 How to operate if want to connect with multiply devices at the same time？
- 4 How the multipoint connections send and receive data? And what are the differences between the sending & receiving of multipoint and point-to -point connections?
- 5 Can not set the parameters, or use the Configuration Tools displaying "connection timeout" when connects to the PC
- 6 How to send AT command by your hand？
- 7 Two serial adapter can not connect with each other
- 8 Why PC, USB Dongle cannot find the serial adapter?
- 9 Why PC USB Dongle and serial adapter cannot realize data communication or only communicate by one-way data communication?
- 10 How to communicate with PDA?
- 11 How to communicate with Bluetooth mobile phone?
- 12.1 Equipment Type Number
- 12.2 MAJOR SERVICE CLASSES
- 12.3 MAJOR DEVICE CLASSES
- 12.4 THE MINOR DEVICE CLASS FIELD
- 12.5 MINOR DEVICE CLASS FIELD - COMPUTER MAJOR CLASS
- 12.6 MINOR DEVICE CLASS FIELD - PHONE MAJOR CLASS
- 12.7 MINOR DEVICE CLASS FIELD - LAN/NETWORK ACCESS POINT MAJOR CLASS
- 12.8 MINOR DEVICE CLASS FIELD - AUDIO/VIDEO MAJOR CLASS
- 12.9 MINOR DEVICE CLASS FIELD - PERIPHERAL MAJOR CLASS
- 12.10 MINOR DEVICE CLASS FIELD - IMAGING MAJOR CLASS
Chongqing Jinou Science &Technology Development Co., Ltd.
http://www.oemblue.com/ info@oemblue.com
29
1
0
0
50 - 67% utilized
1
0
1
67 - 83% utilized
1
1
0
83 - 99% utilized
1
1
1
No service available [REF #3]
X
X
X
All other values reserved
TABLE 1.6: THE LAN/NETWORK ACCESS POINT LOAD FACTOR FIELD
[Ref #3: "Device is fully utilized and cannot accept additional connections at this time, please
retry later"]
The exact loading formula is not standardized. It is up to each LAN/Network Access Point
implementation to determine what internal conditions to report as a utilization percentage. The only
requirement is that the number reflects an ever-increasing utilization of communication resources within
the box. As a recommendation, a client that locates multiple LAN/Network Access Points should
attempt to connect to the one reporting the lowest load.
4 3 2
Minor Device Class
bit no of CoD
0
0
0
Uncategorized (use this value if no other apply)
X
X
X
All other values reserved
TABLE 1.7: RESERVED SUB-FIELD FOR THE LAN/NETWORK ACCESS POINT
12.8 MINOR DEVICE CLASS FIELD - AUDIO/VIDEO
MAJOR CLASS
7
6
5
4
3
2
Minor Device Class
bit no of CoD
0
0
0
0
0
0
Uncategorized, code not assigned
0
0
0
0
0
1
Device conforms to the Headset profile
0
0
0
0
1
0
Hands-free
0
0
0
0
1
1
(Reserved)
0
0
0
1
0
0
Microphone
0
0
0
1
0
1
Loudspeaker
0
0
0
1
1
0
Headphones
0
0
0
1
1
1
Portable Audio
0
0
1
0
0
0
Car audio
0
0
1
0
0
1
Set-top box
0
0
1
0
1
0
HiFi Audio Device
0
0
1
0
1
1
VCR
0
0
1
1
0
0
Video Camera
0
0
1
1
0
1
Camcorder
0
0
1
1
1
0
Video Monitor
0
0
1
1
1
1
Video Display and Loudspeaker
0
1
0
0
0
0
Video Conferencing
0
1
0
0
0
1
(Reserved)
0
1
0
0
1
0
Gaming/Toy [Ref #4]
X
X
X
X
X
X
All other values reserved
[Ref #4: Only to be used with a Gaming/Toy device that makes audio/video capabilities available
via Bluetooth]
TABLE 1.8: SUB DEVICE CLASSES FOR THE 'AUDIO/VIDEO' MAJOR CLASS