Operation Instructions

Remote control key operation instructions

Remote control key operation instructionsRemote control key operation instructions

Remote control key operation instructions

（

（（

（Model No.:80085668

Model No.:80085668 Model No.:80085668

Model No.:80085668 ）

））

）

Aim the remote control device at the generator

Press the start button, the red light will be on, the signal

will be sent, and the engine will start.

If you need to stop, please press the stop button and the engine

will stop working.

Press down and the red indicator lights up slightly, it is

indicating that the battery is low and needs to be replaced.

Matching CR2016 lithium - manganese dioxide button battery

start button

stop button

PAGE 1
Remote control key operation instructions （Model No.:80085668 ） 1 Aim the remote control device at the generator 2 Press the start button, the red light will be on, the signal will be sent, and the engine will start. 3 If you need to stop, please press the stop button and the engine will stop working. 4 Press down and the red indicator lights up slightly, it is indicating that the battery is low and needs to be replaced.
PAGE 2
Regulatory information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.