Owners Manual

Chord Electronics
DAVE | Manual
_
4.1 Placement
4.2 Connecting your source to
DAVE
4.3 Connecting a BLU MK II or
Hugo M Scaler to DAVE
4.4 Connecting a preamplifier/
amplifier to DAVE
4.5 Powering DAVE
Connecting your source to
DAVE
4.2
18 // 35
Input
DAVE has a selection of dierent
inputs and you can connect
several sources at once if you
wish.
Please note that if you are using
the USB input with a Mac/Linux
device, you will not need a
driver, but if you are connecting
a Windows device, it will need a
driver from the DAVE section of
our website:
chordelectronics.co.uk/product/
dave
To set up your system:
1) First, you must ensure that
DAVE and any
connecting equipment,
is turned o.
2) Locate the inputs on the back
of the unit shown below.
3) Select the correct outputs
from your source device
and insert the cables into
the input ports on the DAVE.