User Manual

Chord Electronics

2go | User manual

9 GoFigure app – Conﬁguration

2go can be conﬁgured with the GoFigure app,

available for download on the App Store or

Google Play.

9.1 Requirement

Your control device must have Bluetooth Low Energy (BLE) or Wi-Fi compatibility. If this requirement is

not met, see chapter 9 for the manual conﬁguration method.

9.2 First use

The Setup Wizard of the GoFigure app can be used to quickly set 2go’s most important settings (see

page 11):

1. Install the GoFigure app on your control device.

2. Enable Bluetooth on your control device.

3. Make sure 2go is within range of your control device (< 5 m).

4. Open the GoFigure app and press Select Device. The app will scan for a nearby 2go.

5. Select 2go once it appears on your screen and press Select Device.

6. Please wait while the app loads your 2go.

7. Enter a custom name for your 2go (optional). Press Audio Playback to continue.

8. Select your Wi-Fi network and input your Password OR If using LAN, please connect your cable and

skip this step.

– Press Wi-Fi Normal to connect to a regular Wi-Fi network. Select your Wi-Fi network and enter

the password. Press Continue/Submit.

– Press Wi-Fi Hotspot to switch on 2go’s Hotspot. To connect, open your Wiﬁ settings and select

2go-*****

– Press Bluetooth to connect to your 2go via Bluetooth.

9. Press FINISH to complete the setup wizard.

When using the GoFigure app for the second time, it will open on the Devices Near You page. Select

your 2go to go straight to the conﬁguration menu.