User Manual

Chord Electronics

2go | User manual

11 Connection methods

2Go can connect to an audio source or your control device via Bluetooth, Wi-Fi or LAN.

11.1 Bluetooth

2go’s Bluetooth connection is always available. To establish a Bluetooth connection:

1. Enable Bluetooth on your control device or audio source.

2. Make sure 2go is within range of your control device (< 5 m).

3. Select 2go from the list of available devices.

4. If asked, enter 0000 as the input code. The 2go status LED

ﬂashes purple when the connection is

registered.

NOTE

Bluetooth is a user-friendly wireless connection method, but can result in some loss of

sound quality. The use of a Wi-Fi connection is recommended for optimal sound quality.

NOTE

2go has a maximum Bluetooth range of 5 metres. Sound distortion may occur beyond this

range.

TIP

The PIN can be changed in the Device Settings menu of the Settings tab

of the GoFigure app.

11.2 Wi-Fi

Wi-Fi (or LAN) is the preferred connection method because it ensures the best sound quality. 2go can

establish a Wi-Fi connection in two ways.

NOTE

For optimal Wi-Fi performance, keep the Wi-Fi antenna

clear of obstacles.

NOTE

2Go communicates only via 2.4 GHz networks and has a maximum Wi-Fi range of 10 metres.

TIP

If you intend to play back music via Hugo 2 please select the USB input on the device. This is

denoted by a white input LED being shown.