User Manual

Chord Electronics

2go | User manual

12 Audio playback

2go can play back audio from the various sources (see chapter 2) and will automatically select the

correct source for you when you press play. Please make sure that if you are playing back audio through

Hugo 2 that the USB input is selected, this is denoted by a white colour.

12.1 Roon

2go can act as a Roon Ready device and play back audio from your personal Roon server:

1. Make sure 2go is connected to the same network as your ‘Roon Core’ and/or ‘Remote device’.

2. Navigate to your Roon Output settings and enable 2go. 2go is now a registered output.

12.2 Airplay

2go supports AirPlay, which allows it to connect to and play back audio from your Apple devices.

1. Make sure 2go and your Apple device are connected to the same Wi-Fi network.

2. Navigate to your Apple device’s audio output options and select 2go. All audio will now route to 2go.

Please ensure your iPhone master volume is set to maximum before adjusting the Hugo 2 volume

12.3 Bluetooth audio

2go can play back audio via a Bluetooth connection.

1. Enable Bluetooth on your control device and select 2go to connect.

2. Play music from your control device.

NOTE

If there are multiple 2go devices available, please select the one that is currently not

selected.

TIP