User Manual

Chord Electronics

2yu | User manual

7 Powering on 2yu

2yu does not have its own internal battery and requires continuous power, which must be supplied at

all times, from 2go.

Connect the included 5 V 2 A Micro USB adapter to a wall outlet and insert the Micro USB cable into

2go. A green power LED should be displayed; a red power LED indicates 2yu is o. Do not use any

third-party power supplies as they may damage the product and will void the warranty.

Press the power button once to power up both devices. All four buttons should illuminate.

NOTE

If the buttons appear faint, the dim function may have been enabled. Refer to section

10.0 for more information.

Powering o:

To turn 2go/2yu o, press and hold the power button until it turns RED.