User Manual

Chord Electronics
Hugo M Scaler | Manual
_
Whilst the Hugo M Scaler
operates normally within a stack
including the Hugo TT 2 and
TToby, it is recommended that
you allow the device to breathe.
Allocating 10cm of space around
it to convection-cool during
operation is advised. If possible,
do not place the unit(s) inside a
cabinet.
As the infra-red remote
control requires a
direct line of sight to
the viewing portal, please avoid
placing objects in front of either
device.
4.1 Placement
4.2 Connecting an input to
Hugo M Scaler & input
selection
4.3 Connecting Hugo M Scaler
to Hugo TT 2
4.4 Connecting Hugo M Scaler
to another DAC
4.5 Output sample rate settings
Placement 4.1
18 // 33