User Manual

Chord Electronics
Hugo M Scaler | Manual
_
Press the input button to select
the source you require. The
colour changes depending on
input selected, see diagram
below. If you are using dual data,
when you select BNC 1 the Hugo
M Scaler will automatically switch
on both outputs to dual data
mode.
5.1 Basic navigation
5.2 Selecting your input
5.3 Viewing the incoming sample
rate
5.4 Selecting your upsample rate
5.5 Video mode
5.6 DX buttons
Selecting your input 5.2
25 // 33
USB BNC 2 Automatic
(auto)
Dual BNCOptical 2Optical 1BNC 1