User Manual

Chord Electronics
Hugo M Scaler | Manual
_
When an input is selected and
audio is being played back, the
sample rate will be indicated via
the DX OP button. Hugo M Scaler
supports incoming sample rates
from 44.1 kHz to 768 kHz - 16-bit
to 32-bit. You can refer to the
illuminated colours DX OP button
below and their associated
sample rates.
5.1 Basic navigation
5.2 Selecting your input
5.3 Viewing the incoming sample
rate
5.4 Selecting your upsample rate
5.5 Video mode
5.6 DX buttons
Viewing the incoming sample
rate
5.3
26 // 33
You are unable to press the
button to change sample rates,
this button only displays the
sample rate. The sample rate is
automatically detected. Please
use the input and output sample
rate to change this.
44.1 48 88.2 96 176.4 192 352.8 384 705.6 768 DSD
kHz