User Manual

Chord Electronics
Hugo M Scaler | Manual
_
4 // 33
Introduction 1.1
Hugo M Scaler is a
device that converts
your sources to 705.6 or
768 kHz 24-bit PCM and achieves
reconstruction of the original
analogue signal in the ADC to a
better than 16-bit accuracy under
all conditions.
Before operation, we strongly
advise you read this user manual
thoroughly.
We also recommend that you
store this user manual, along with
your original receipt of purchase,
in a safe place should you require
assistance in the future.
1.1 Introduction
1.2 Protection against
liquids & heat
1.3 Dismantling & radio frequency
interference
1.4 Connecting your equipment