User Manual

Chord Electronics
PRIMA | Manual
_
Main line output: To assign the
main output with a particular
input signal, press the Main line
button several times to cycle
through the 5 line inputs until,
the display shows the input you
wish to use. The options are
shown in the diagram below;
5.1 Basic navigation
5.2 Volume and balance control
5.3 Display
5.4 Viewing settings
Display 5.3
24 // 28
Volume: Use the volume knob
to adjust the volume manually.
A clockwise turn of the knob will
increase the volume and an anti-
clockwise turn of the knob will
decrease the volume. The volume
range runs from 0 to 98 and is
displayed on the PRIMA as you
alter the volume. If the outputs
are muted, a volume change will
un-mute the outputs to prevent
large changes in volume from
damaging your loudspeakers. An
example is display below;
Recording line ouput: To
assign a recording output with
a particular input signal, press
the recording line button several
times to cycle through the 5 line
inputs until, the one you wish to
use is displayed. The options are
shown in the diagram below