User Manual
Chord Electronics
PRIMA | Manual
_
You can adjust the input gain on
you input devices so that you can
align the volume levels of your
dierent inputs. There are six
settings, which are x0.25, x0.50,
x0.75, x1.00, x1.25 and x1.50.
Most modern input devices
such as CD players have an
unbalanced output voltage of 2V
and a balanced output 4V, which
does not require any increased
gain amplification.
However, older audio equipment
may have an output voltage of
less than 2V, in which case you
may like to adjust the input gain.
6.1 Gain
Gain 6.1
27 // 28
Gain display: Once you have
adjusted the gain setting on an
input device your amplifier will
remember the setting on booting
up the system in the future.
The six available gain settings
are shown below as they are
displayed on the Prima.
Gain on main line inputs: Press
Main on the pre amp remote
followed by the VOL + button to
increase the gain rate or VOL - to
decrease.
Gain on recording line inputs:
Press Tape on the pre amp
remote followed by the VOL +
button to increase the gain rate
or VOL - to decrease.