User Manual

Chord Electronics
PRIMA | Manual
_
Before connecting the Prima
to any equipment, consult the
manufacturer’s user guide to
confirm compatibility.
When connecting the Prima to
any equipment, make sure that
all devices are o, including the
Prima.
Once connected, switch all
equipment on starting with
the source and ending with the
amplification.
Initially, operate the any
connected equipment on its
lowest gain setting and lowest
volume setting, gently increasing
to a comfortable listening level.
Never operate connected
equipment to the Prima
at excessive sound levels;
permanent hearing damage and
loss can occur.
The included 15V 4000mA
power supply simply plugs into
the Prima.
If the power supply is
prematurely disconnected Prima
may still remain active for up to
15 seconds, however, this may
cause damage to connected
equipment.
1.1 Introduction
1.2 Protection against
liquids & heat
1.3 Dismantling & radio frequency
interference
1.4 Connecting your equipment
Connecting your equipment 1.4
Never disconnect
the power cable
during operation.
Only disconnect when Prima
is o. If the power cable
is disconnected during
operation there is a risk
of damage to connected
equipment.
7 // 28