User Manual

Chord Electronics
TToby | Manual
_
TToby is equipped with a stereo
pair of unbalanced (single-
ended) RCA inputs and a stereo
pair of balanced XLR inputs.
TToby has no ability to switch
between the inputs, therefore,
only one must be used. Connect
the left and right line input
channels on TToby with the
corresponding line outputs
on your preamp or device and
double-check.
4.1 Placement
4.2 Connecting TToby to
ancillary equipment
4.3 Line level inputs
4.4 Audio outputs
4.5 Power-on sequence
4.6 Earthing issues in Europe
Line level inputs 4.3
19 // 23
WARNING: TToby
must be connected
to a dedicated
preamplifier, or a device
capable of attenuating its
output. Failure to attenuate
the volume before it enters
TToby could result in
irreversible hearing damage,
speaker damage and could
void the warranty.
Left channel balanced
XLR input
Right channel balanced
XLR input
Left channel unbalanced
RCA input
Right channel unbalanced
RCA input