User Manual

Chord Electronics
TToby | Manual
_
TToby supports a single stereo
output. In order to connect
TToby to loudspeakers, use
high-quality loudspeaker cable
terminated with 4mm banana
plugs or 6mm spades. Bare
wire can be used, but it is not
recommended.
4.1 Placement
4.2 Connecting TToby to
ancillary equipment
4.3 Line level inputs
4.4 Audio outputs
4.5 Power-on sequence
4.6 Earthing issues in Europe
Audio outputs 4.4
20 // 23
Connect the black (negative)
terminal from TToby to the
negative terminal on your
loudspeaker and the red
(positive) terminal from TToby to
the red positive terminal on your
loudspeaker. Repeat for each
channel.
Left channel positive
speaker terminal
Left channel negative
speaker terminal
Right channel negative
speaker terminal
Right channel positive
speaker terminal