User Manual

Chord Electronics
ULTIMA 6 | Manual
_
ULTIMA 6 is equipped with
both balanced XLR inputs as
well as unbalanced RCA inputs.
ULTIMA 6 has no ability to switch
between the inputs therefore,
only one must be used.
4.1 Placement
4.2 Connecting ULTIMA 6 to
ancillary equipment
4.3 Audio inputs
4.4 Audio outputs
4.5 Power-on sequence and 12V
trigger
4.6 Earthing issues in Europe
4.7 Adjusting the brightness of the
LED‘s
Audio inputs 4.3
19 // 24
WARNING: ULTIMA 6 must
be connected to a dedicated
preamplifier, or a device
capable of attenuating its
output. Failure to attenuate
the volume before it enters
ULTIMA 6 could result in
irreversible hearing damage,
speaker damage and could
void the warranty.
Balanced XLR Right
input
Balanced XLR Left
input
Unbalanced RCA Right
input
Unbalanced RCA Left
input