User Manual

Chord Electronics
ULTIMA 6 | Manual
_
At any time, you can adjust the
brightness of the LEDs to suit
your listening environment.
Simply locate the hidden button
in the middle of the faceplate
as indicated below, insert a thin
object and push until you hear an
audible ‘click’. The light ring and
power button will cycle between
low and high brightness modes.
4.1 Placement
4.2 Connecting ULTIMA 6 to
ancillary equipment
4.3 Audio inputs
4.4 Audio outputs
4.5 Power-on sequence and 12V
trigger
4.6 Earthing issues in Europe
4.7 Adjusting the brightness of the
LED‘s
Adjusting the brightness of the
LED‘s
4.7
23 // 24