User Manual

Chord Electronics
ULTIMA 6 | Manual
_
6 // 24
There are no user-
serviceable components
within the ULTIMA 6
or its power supply. Dangerous
voltages/currents exist within
the ULTIMA 6 and its power
supply, posing a severe risk of
electrocution and/or fire.
Never attempt to
open, dismantle or
apply internal third-
party devices to it or insert
anything other than the listed
interconnects or speaker cables
within this user manual.
If the ULTIMA 6 develops a
fault or the casework becomes
damaged, immediately
disconnect from the mains power
supply and connected equipment
and contact Chord Electronics
for further advice.
1.1 Introduction
1.2 Protection against
liquids & heat
1.3 Dismantling & radio frequency
interference
1.4 Connecting your equipment
Dismantling & radio
frequency interference
1.3
With a thick, solid aluminium
chassis, the ULTIMA 6’s casework
largely protects the sensitive
internal circuitry from radio
frequency interference. However,
for optimal performance, it is
recommended that the following
points are observed:
1.Consider placing the
ULTIMA 6 away from
wireless routers.
2.Separate the
ULTIMA 6 from
amplifiers using
toroidal transformers.
3.Operate mobile
phones at a distance
to avoid interference.
Although the ULTIMA
6 is largely shielded,
it can generate radio
frequency interference that
may have an eect on radio
and television reception. If this
occurs, please reconsider your
placement.