User Manual

Chord Electronics
ULTIMA PRE 2 | Manual
_
ULTIMA PRE 2 comes equipped
with recording outputs. These are
the two pairs of RCA connectors
listed as the furthermost T1
and T2. These RCA outputs are
always live, at line level, and
cannot be attenuated. Never
connect an amplifier to these
connectors! You can select the
input to be passed through to
the recording output via the
dedicated button on the front of
the device.
1) Turn o the ULTIMA PRE 2
and any other connected
equipment.
4.1 Placement
4.2 Connecting an input to
ULTIMA PRE 2
4.3 Connecting ULTIMA PRE 2 to a
power amplifier
4.4 Connecting ULTIMA PRE 2
to a recording device
4.5 Connecting ULTIMA PRE 2
to a AV device
4.6 Connecting ULTIMA PRE 2
to headphones
Connecting ULTIMA PRE 2
to a recording device
4.4
21 // 33
Recording
ouputs 1-2
5) With the Volume a the lowest
setting initiate playback and
gradually increase the volume
to a comfortable setting
to protect your hearing and
devices.
Please view section 5.4 for more
details on recording with ULTIMA
PRE 2.
2) Locate the RCA inputs
shown below and connect
your recording device with
RCA cables.
3) With the Volume set to
the lowest setting Turn on all
equipment, including the
ULTIMA PRE 2.
4) Select the appropriate input
on the recording device.