Operating Instructions

Touch-it CE 15,6
Operating Instructions
Copyright / © Christ Electronic Systems GmbH 11 / 15 Aug. 2020, Revision 01
a member of the Christ Company Group Document No.: PA10003599
3.4 Interfaces
USB
2 x USB 2.0
Ethernet
1 x 100 Mbit Ethernet
Communication
1 x RS-232, 1 x RS485, 1 x CAN
(one connector)
Power Connector
Phoenix 3-pol MC 1,5/ 3-ST-3,5 BK
INTERFACES
COM Connector Pinning
Pin
Function
Description
1
GND
Ground
2
GND
Ground
3
RS485_P
RS485 Positiv
4
RS232_TX
RS232 Transmitter Signal
5
RS232_RX
RS232 Receiver Signal
6
RS485_N
RS485 Negative
7
CAN_Low
CAN Low Signal
8
CAN_High
CAN High Signal
3.5 Power supply
The power supply was part of the safety and EMC certification and it is necessary to use this kind or a
similar one in respect of the technical datas:
Type of power supply
FSP060-DAAN2
Input voltage
100-240Vac
Output voltage
24Vdc
Max. output current
2,5A
Power Connector
Phoenix 3-pol MC 1,5/ 3-ST-3,5 BK
Changing the type of the power supply without our permittion, may cause problems with the conformitiy
of the certifications and therefore is not guaranteed
The device is only permitted to be supplied with a SELV/PELV power supply or with safety extra
lowvoltage (SELV) per EN 62368-1