Technical data

The following actual values can be selected via the sub-scrollbar:
- Time h:min
(current time)
- Tot. h:min
(total process time)
- Sec. h:min
(time of process phase)
- Vacuum mbar
(actual vacuum value)
- Condens.°C
(ice condenser temperature)
- Shelf °C
(shelf temperature)
- Product °C
(product temperature)
- Lyo Rx %
(optional)
- Lyo Prod.°C
(optional)
In case a position should not present an actual value, select
--blank-- from the sub-scrollbar.
To switch from the values window to the mimic diagram select the
menu item VALUES Æ Show mimic diagram.
Fig. 16 Opening the mimic diagram
5.2.4. Status bar
The status bar always shows the current operating mode and the
pre-selected or active phase. In the programmer mode, it also
shows the current program section and the total program sections.
Fig. 17 Status bar in the manual mode
Operating Manual Freeze Dryer ALPHA 1-4 LSC / ALPHA 2-4 LSC LSC Control System • 47