LX1000 USER MANUAL 020-000141-01
= Lens not included. User Manual LX1000 User Manual 020-000141-01 Rev.
Features and Design This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology. U Functionally Rich U Operation menu is available in 12 languages; English, German, French, It alian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, and Japanese (p.48).
Table of Contents Features and Design. . . . . . . . . . . . . . . . Table of Contents . . . . . . . . . . . . . . . . . . To The Owner . . . . . . . . . . . . . . . . . . . . . Safety Instructions . . . . . . . . . . . . . . . . . 2 3 4 5 Air Circulation 6 Installing the Projector in Proper Directions 7 Moving the Projector 8 Compliance . . . . . . . . . . . . . . . . . . . . . . . 9 Part Names and Functions. . . . . . . . . . 10 Computer Input . . . . . . . . . . . . . . . . . .
To The Owner Before installing and operating the projector, read this manual thoroughly. The projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in good condition for many years to come. Improper operation may result in not only shortening the product life, but also malfunctions, fire hazard, or other accidents.
Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. This projector should be operated only from the type of power source indicated on the marking label.
Safety Instructions Air Circulation IMPORTANT! Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken. – Do not put any flammable object or spray can near the projector, hot air is exhausted from the air vents.
Safety Instructions Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane.
Safety Instructions Moving the Projector Retract the adjustable feet to prevent damage to lens and cabinet. For safety, holding the projector on both sides by 2 or more people is recommended to move the projector because the projector is heavy. When moving the projector by one person from necessity, hold the handle carefully. Do not hold the lens mount cover. Moving it improperly may result in damage of cabinet or person's injury.
Compliance Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Part Names and Functions Front B D Lens Mount Cover J Projection Lens (Option) 8 Indicators E Infrared Remote Receiver (Front) D G Adjustable Feet L Terminals and Connectors H Handle < Side Control B Lamp Cover J 8 E G L H < G Infrared Remote Receiver (Rear) Exhaust Vent CAUTION Back Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side.
Part Names and Functions Terminals and Connectors D J 8 E G L H < = D SERIAL PORT IN TERMINAL If you control the projector by computer, you must connect a cable (not supplied) from your computer to this terminal. G DVI INPUT TERMINAL J SERIAL PORT OUT TERMINAL This terminal outputs signal from SERIAL PORT IN. More than two projectors can be controlled with one computer by connecting SERIAL PORT IN of another projector to this terminal.
Part Names and Functions Side Control and Indicators INDICATORS SIDE CONTROLS Side Control D H J < 8 B E G L D ON/STAND-BY button Turn the projector on or off. (pp.23,24) J ZOOM button Zoom in and out the images. (p.27) 8 MENU button Open or close the On-Screen MENU. (pp.25, 26) E POINT buttons - Select an item or adjust the value in the OnScreen MENU. (p.25) - Pan the image in DIGITAL ZOOM + mode. (p.40) G SHUTTER button Close and open up the built-in shutter. (p.
Part Names and Functions Indicators D J 8 D LAMP Indicator This indicator is dim when the projector is turned on. And bright when the projector is in stand-by mode. (pp.72-74) J READY indicator This indicator lights green when the projector is ready to be turned on. And it flashes green in Power Management mode. (pp.52, 72-74) E G L H 8 WARNING TEMP. indicator This indicator flashes red when internal projector temperature is too high. (pp.
Appendix Configurations of Terminals ANALOG (Mini D-sub 15 pin) 4 5 10 15 9 14 2 3 8 13 1 7 12 6 11 1 2 3 4 5 6 7 8 Red Input Green Input Blue Input 1 2 3 4 5 6 7 8 T.M.D.S. Data2– T.M.D.S. Data2+ T.M.D.S. Data2 Shield No Connect No Connect DDC Clock DDC Data No Connect No Connect Ground (Horiz.sync.) Ground (Red) Ground (Green) Ground (Blue) 9 10 11 12 13 14 15 +5V Power Ground (Vert. sync.) Ground DDC Data Horiz. sync. Vert. sync.
Part Names and Functions Remote Control Battery Installation 1 Open the battery compartment lid. 2 Install new batteries into the compartment. Pull up the lid and remove it. 3 Replace the compartment lid. Two AA size batteries For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment. To ensure safe operation, please observe the following precautions : L Use two (2) AA or LR6 type alkaline batteries. L Always replace batteries in sets.
Part Names and Functions Remote Control Code The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on page 52.
Installation Lens Installation Before setting up the projector, install Projection Lens on the projector. Before installation, check where the projector is used and prepare a suitable lens. For the specifications of Projection Lens, contact sales dealer where you purchased the projector. - Do not use the optional lens below for this projector. Otherwise damages may result. LENS MODEL NO. : 38-809041-02 - Lens installation and replacement should be made by the qualified service personnel.
Installation Lens Shift Adjustment Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This function makes the positioning of images easy on the screen.(See page 27) The display position can be shifted upward up to 50% elevation of the display. The display position can be shifted downward up to 50% low level of the display. When the lens is shifted to top. The display position can be shifted to the left in up to 10% width of the display.
Installation Terminals of Projector The projector has two replaceable Interface board slots. The projector's functions can be extended by installing the optional interface boards into the terminal slots. 2 vacant slots (Input 3 and 4) are provided in your purchasing the projector. For the Optional Interface Boards, contact sales dealer where you purchased the projector.
Installation Connecting to Computer Cables used for connection s 6'! #ABLE $ SUB PIN) * s DVI Cable s BNC Cable (BNC x 5) ( *One cable is supplied; Other cables are not supplied with this projector.
Installation Connecting to Video Equipment Cables used for connection s Video Cable (BNC x 3, BNC x 1) s SCART-VGA Cable s DVI Cable s S-Video Cable ( Cables are not supplied with the projector.) Component video output equipment. Video Source (example) Video Cassette Recorder Digital Output (HDCP compatible) RGB SCART Composite 21-pin Output Video Output SCART-VGA DVI Cable DIGITAL Cable ANALOG (such as DVD player or high-definition TV source.
Installation Connecting the AC Power Cord This projector uses nominal input voltages of 100-120 or 200–240 V AC. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning on the projector.
Basic Operation Turning On the Projector 1 Complete peripheral connections (with a computer, VCR, etc.) before turning on the projector. 2 Connect the projector’s AC power cord into an AC outlet and turn on the MAIN ON/OFF Switch. The LAMP indicator lights red and the READY indicator lights green. 3 Press the ON/STAND-BY button on the side control or on the remote control. The LAMP indicator dims red and the cooling fans start to operate.
Basic Operation Turning Off the Projector 1 Press the ON/STAND-BY button on the side control or on the remote control, and “Power off?” appears on the screen. 2 Press the ON/STAND-BY button on the side control or on the remote control again to turn off the projector. The LAMP indicator lights bright and the READY indicator turns off. After the projector is turned off, the cooling fans operate. You cannot turn on the projector during this cooling down period.
Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. Side Control MENU button 1 Press the MENU button on the side control or the remote control to display the On-Screen Menu. 2 Use the Point buttons to select a Menu icon. Use the Point ! buttons to select an item in the selected menu. 3 Press the SELECT button to show the item data.
Basic Operation Menu Bar For detailed functions of each menu, see “Menu Tree” on pages 69-71. For Computer Source D J 8 E G L H < B D Guide Window L Image Adjust Menu Show the selected Menu of the On-Screen Menu. Used to adjust the computer image. [Contrast/ Brightness/ Color management/Auto picture control/Color temp./White balance (R/G/B)/Offset (R/G/B)/Sharpness/ Gamma/Reset/ Store] (pp. 45-47). J Input Menu Used to select an input source Computer or Video (pp. 3133).
Basic Operation Operating with Projector Control Zoom Adjustment Display “Zoom” on the screen. Press the ZOOM button and then press the point ! buttons to zoom in and out the image. Side Control ZOOM button FOCUS button Focus Adjustment Display “Focus” on the screen. Press the FOCUS button and then press the point ! buttons to adjust the focus of the image. LENS SHIFT button Lens Shift Adjustment Display “Lens shift” on the screen.
Basic Operation Information Information Menu Information display can be used to confirm the current operating condition of the projector and the signal being projected through the projector. Information Menu Press the INFORMATION button to display the information window on the screen. To hide the information window, press the INFORMATION button again or Point buttons. The information window can also be selected from the menu. * The H- and V-sync freq.
Basic Operation Operating with Remote Control Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. AUTO PC button Press the AUTO PC button on the remote control to operate the Auto PC Adj. function. The computer screen adjustment can be done easily by pressing this button. See page 35 for details. LENS SHIFT button See page 27 for details.
Basic Operation Remote Control SHUTTER button See page 27 for details. SHUTTER button FILTER button Press and hold the FILTER button for more than five seconds to replace the filter mechanically. See page 51 for details. Note: IMAGE ADJ. button s4HE FILTER CANNOT BE REWOUND s 7HEN THE FILTER IS REPLACED THE TOTAL ACCUMULATED TIME OF THE FILTER USE IS AUTOMATICALLY SET TO IMAGE ADJ. button KEYSTONE button Press the IMAGE ADJ.
Input Selection Input Side Control Side Control button operation INPUT button INPUT 1 INPUT button INPUT 2 INPUT 3 INPUT 4 Side Control Operation Press the INPUT button on the side control. It switches to INPUT 1, INPUT 2, INPUT 3 and INPUT 4 as you press the INPUT button. Before using the INPUT button on the side control, you must select a correct input source by On-Screen Menu and the latest input source will be displayed.
Input Selection Computer Input Source Selection Menu Operation When Selecting the INPUT 1 with DVI/D-sub 15 terminals 1 Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the INPUT Menu icon. 2 Use the Point ! buttons to move the red arrow pointer to the desired input and then press the SELECT button. Then you can switch to the desired input. 3 Press the select button again. The Source Select Menu appears.
Input Selection Video Input Source Selection Menu Operation When Selecting the INPUT 1 with DVI/D-sub 15 terminals INPUT MENU When connecting to video equipment, select the type of Video source in the Source Select Menu. Input Menu icon RGB (Scart) When scart video equipment is connected to the INPUT 1 (ANALOG) terminal, select RGB (Scart). Move the pointer (red arrow) to Input 1 and press the SELECT button.
Computer Input Computer System Selection Automatic Multi-Scan System This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, WXGA, UXGA, or WUXGA (refer to “Compatible Computer Specifications” on pages 75-76). If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Some computers need to be set manually.
Computer Input Auto PC Adjustment Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer. Direct Operation Remote Control The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control or the AUTO PC ADJ. button on the side control. AUTO PC button Side Control AUTO PC ADJ. button Menu Operation Auto PC adj. 1 Press the MENU button to display the On-Screen Menu.
Computer Input Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer.
Computer Input Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures. To clear the adjusted data. Mode free To clear the adjusted data, select Mode free and then press the SELECT button. Move the red arrow pointer to the Mode that you want to clear and then press the SELECT button. Store To store the adjusted data, select Store and then press the SELECT button.
Computer Input Image Level Selection Direct Operation Press the IMAGE SEL. button on the remote control to select the desired image level. Remote Control Standard IMAGE SEL. button Real Image1 s s s Image 10 Menu Operation 1 Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the Image Select Menu icon. 2 Use the Point ! buttons to move the red frame pointer to the desired image level and then press the SELECT button.
Computer Input Screen Size Adjustment Select the desired screen size that conforms to the input signal source. 1 Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the Screen Menu icon. 2 Use the Point ! buttons to move the red frame pointer to the desired function and then press the SELECT button. SCREEN MENU Screen Menu icon Move the red frame pointer to the desired function and press the SELECT button.
Computer Input Keystone SCREEN MENU This function is used to store or reset the keystone correction when the Main On/Off Switch is pressed to Off or the AC power cord is unplugged. Use the Point buttons to switch between each option. Store. . . Keep the keystone correction even when the Main On/Off Switch is pressed to Off or the AC power cord is unplugged. Reset . . Release the keystone correction when the Main On/ Off Switch is pressed to Off or the AC power cord is unplugged.
Video Input Video System Selection 1 Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the AV System Menu icon. 2 Use the Point ! buttons to move the red arrow pointer to the desired system and then press the SELECT button. Video Jack or S-Video Jack Auto The projector automatically detects an incoming video system, and adjusts itself to optimize its performance.
Video Input Image Level Selection Direct Operation Press the IMAGE SEL. button on the remote control to select the desired image level. Remote Control Standard IMAGE SEL. button Cinema Image1 s s s Image 10 Menu Operation 1 Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the Image Select Menu icon. 2 Use the Point ! buttons to move the red frame pointer to the desired image level and then press the SELECT button.
Video Input Screen Size Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the Screen Menu icon. 2 Use the Point ! buttons to move the red frame pointer to the desired function and then press the SELECT button. SCREEN MENU Screen Menu icon Move the red frame pointer to the desired function and press the SELECT button. Normal Provide the image at the normal video aspect ratio of 4:3.
Video Input Keystone SCREEN MENU This function is used to store or reset the keystone correction when the Main On/Off Switch is pressed to Off or the AC power cord is unplugged. Use the Point buttons to switch between each option. Store. . . Keep the keystone correction even when the Main On/Off Switch is pressed to Off or the AC power cord is unplugged. Reset . . Release the keystone correction when the Main On/ Off Switch is pressed to Off or the AC power cord is unplugged.
Picture Image Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the Image Adjust Menu icon. 2 Use the Point ! buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point buttons to adjust the setting value. IMAGE ADJUST MENU Image Adjust Menu icon Move the red frame pointer to the desired item and then press SELECT button.
Picture Image COLOR SELECTION MODE (continued) COLOR M. Return to the COLOR MANAGEMENT POINTER. (If you press the MENU button on the side control or the remote control, it returns to the COLOR MANAGEMENT POINTER and you will need to reselect and readjust the color.) COLOR SELECTION MODE Level and phase adjustment palette. Gamma adjustment palette. MENU Return to the IMAGE ADJUST Menu. Any settings that have been changed will not be stored.
Picture Image White balance (Red/Green/Blue) Press the Point button to lighten red/green/blue tone; press the Point button to deepen red/green/blue tone (from 0 to 63). Offset (Red/Green/Blue) Press the Point button to lighten red/green/blue tone of the black level of an image; press the Point button to deepen red/ green/blue tone of the black level of an image (from 0 to 63).
Setting Setting This projector has a Setting menu that allows you to set up other various functions. 1 Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the Setting Menu icon. 2 Use the Point ! buttons to move the red frame pointer to the desired item and then press the SELECT button. The Setting dialog box appears. SETTING MENU (Language) Setting Menu icon Set the red frame pointer to the item and press the SELECT button.
Setting Logo Logo This function allows you to customize the screen logo with Logo select, Capture, and Logo PIN code lock functions. Note: s 7HEN h/Nv IS SELECTED IN THE ,OGO 0). CODE LOCK FUNCTION ,OGO SELECT AND #APTURE FUNCTIONS CANNOT BE SELECTED Logo select This function decides on the starting-up display from among the following options. User . . . Show the image you captured. Default . Show the factory-set logo. Off . . . . Show the countdown display only.
Setting Logo PIN code lock Logo PIN Code Lock This function prevents an unauthorized person from changing the screen logo. Off . . . . The screen logo can be changed freely from the Logo Menu. On . . . . The screen logo cannot be changed without a Logo PIN code. If you want to change the Logo PIN code lock setting, press the SELECT button and the Logo PIN code dialog box appears. Enter a Logo PIN code by following the steps below. The initial Logo PIN code is set to “4321” at the factory.
Setting Lamp mode This Projector is equipped with 2 Projection Lamps and the number of using lamps can be switched to 2 lamps or 1 lamp. Using 1 lamp maintains the life of Projection Lamps. Note: To change over Lamp Mode Set "2 lamps mode" or "1 lamp mode" by pressing the Point buttons. When the Lamp Mode is switched from "2 lamps mode" to "1 lamp mode", the image becomes a little darker. When the Lamp Mode is switched from "1 lamp mode" to "2 lamps mode", the image becomes brighter gradually.
Setting Remote control The eight different remote control codes (Code 1–Code 8) are assigned to the projector; the factory-set, initial code (Code 1) and the other seven codes (Code 2 to Code 8). Remote control The same code should be set on both the projector and the remote control. For example, operating the projector in “Code 7”, the remote control code also must be switched to “Code 7”. To change the code for the projector; Select a remote control code in this Setting Menu.
Setting On start When this function is set to “On,” the projector will be automatically turned on just by connecting the AC power cord to the wall outlet. Note: s -AKE SURE THAT THE -!). /. /&& SWITCH IS /.
Setting Enter a PIN code Enter a PIN code Use the Point ! buttons on the side control or on the remote control to enter a number. Press the Point button to fix the number and move the red frame pointer to the next box. The number changes to “3.” Repeat this step to complete entering a fourdigit number. After entering the four-digit number, move the pointer to “Set.” Press the SELECT button so that you can change the PIN code lock setting .
Setting Shutter Shutter function is available to block out light to the screen, so that the screen can be used for the other presenters. Protection Prohibits the shutter operation from the remote control and the projector's side control. Remote control Projector . . . Selecting "On" prohibits the shutter operation from the remote control. Selecting "On" prohibits the shutter operation from the side control.
Setting Filter counter Filter counter This function is used to set a time for the filter replacement. Use the Point ! buttons to move the red frame pointer to Filter counter and then press the SELECT button. A dialog box appears showing the Used time option and the Scrolls remaining option. Used Time . . . . . . Show the total accumulated time of the filter use, timer setting option and the Reset options. When the projector reaches a time set in the timer setting, the Filter replacement icon (Fig.
Maintenance and Care Filter Instructions Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. This projector has an electrically operated filter which helps you to replace the filter easily.
Maintenance and Care Replacing the Filter Cartridge 1 Turn off the projector, press the Main On/Off Switch to Off and unplug the AC power cord from the AC outlet. 2 First, clean up the dust on the projector and around the air vents. 3 Slide and open the Filter cover. (See the right figure.) 4 Pull out the filter cartridge by holding the finger grip. 5 Put the new one back into the position and close the filter cover. Make sure that the filter cartridge is properly and fully inserted.
Maintenance and Care Resetting the Filter Counter Filter counter Be sure to reset the Filter counter after replacing the filter cartridge. 1 Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the Setting Menu icon. 2 Use the Point ! buttons to move the red frame pointer to Filter counter and then press the SELECT button. A dialog box appears showing the Used time option and the Scrolls remaining option.
Maintenance and Care Lamp Management This Projector is equipped with 2 Projection Lamps to ensure brighter image and those lamps are controlled by the Lamp Management Function. The Lamp Management Function detects the status of lamps and shows the status on screen or on the LAMP 1/2 REPLACE indicators. This function also automatically controls the Lamp Mode when any of lamps is out for the end of life or malfunctions.
Maintenance and Care Lamp Replacement When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP 1/2 REPLACE indicator lights orange. Replace the lamp with a new one promptly. The timing when the LAMP 1/2 REPLACE indicators should light is depending on the lamp mode. Indicators WARNING: TURN OFF THE UV LAMP BEFORE OPENING THE LAMP COVER. Lamp replacement icon Allow the projector to cool, for at least 45 minutes before you open Lamp Cover.
Maintenance and Care Resetting the Lamp Counter Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP 1/2 REPLACE indicator stops lighting and the Lamp replacement icon disappears. 1 Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the Setting Menu icon 2 Use the Point ! buttons to move the red frame pointer to Lamp counter and then press the SELECT button. A dialog box appears.
Maintenance and Care LAMP HANDLING PRECAUTIONS This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard. L Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a shorter period of time than other similar lamps.
Maintenance and Care Cleaning the Projection Lens Turn off the projector, press the Main On/Off Switch to Off and unplug the AC power cord from the AC outlet before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner, or use a lens cleaning paper or commercially available air blower to clean the lens. Avoid using an excessive amount of cleaner.
Maintenance and Care Warning Indicators The WARNING indicators show the state of the function which protects the projector. Check the state of the WARNING TEMP. indicator and the LAMP indicator to take proper maintenance. The projector is shut down and the WARNING TEMP. indicator is blinking red. Indicators When the temperature inside the projector reaches a certain level, the projector will be automatically shut down to protect the inside of the projector.
Appendix Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. 1. Make sure you have properly connected the projector to peripheral equipment as described on pages 20–21. 2. Check the cable connection. Make sure that all computers, video equipment, and power cords are properly connected. 3. Make sure that all power is switched on. 4. If the projector still does not produce an image, restart your computer. 5.
Appendix – The end of lamp life is approaching. Replace the lamp with a new one promptly. (See page 55) appears on the screen –The filter is out of scroll. Replace the filter cartridge with a new one promptly. (See pages 57-58) appears on the screen The image is out of focus. – Adjust the focus of the projector. – Check Projection Lens to see if it needs cleaning.
Appendix The power is turned off automatically. –Power management function runs by initial setting. Check “SETTING” section on page 52. You cannot operate with the side control. –The side control is not available If the side control is locked at “Key lock” under “Security” of SETTING section. Please check “SETTING” section on page 53. The Remote Control does not work. –Check the batteries. –Check if the RC sensor is set properly.
Appendix Menu Tree Computer Input/Video Input Input Input 1 Go to System (1) RGB (PC analog) RGB (Scart) Input 2 Go to System (1) RGB (AV HDCP) Go to System (1) RGB Go to System (1) Y, Pb/Cb,Pr/Cr Go to System (3) Video Go to System (2) S-video Go to System (2) Input 3 (For Optional Interface Boards) Input 4 (For Optional Interface Boards) Information Information RGB (PC digital) Image Adjust Image Adjust Input H-sync freq. V-sync freq.
Appendix Computer Input System (1) Image Select Mode 1 Standard Mode 2 Real SVGA 1 Image 1 SVGA 2 SVGA 3 Image 10 = System displayed in the System Menu varies depending on the input signal. PC Adjust Screen Auto PC adj. Fine sync. Normal True 0–31 Total dots Wide Position H Full screen Position V Scale H /V H &V On/Off Position H /V Common Reset Custom H-sync freq. Current mode V-sync freq.
Appendix Computer Input/Video Input Setting 12 languages provided.
Appendix Indicators and Projector Condition Check the indicators for the projector condition. The projector is operating normally. Indicators LAMP red READY green Projector Condition LAMP 1/2 WARNING WARNING SHUTTER REP. TEMP. FILTER blue orange red orange The projector is off. (The main On/Off switch is OFF position or the AC power cord is unplugged.) = The projector is in stand-by mode. Press the ON/ STAND-BY button to turn on the projector. = = The projector is operating normally.
Appendix The projector is detecting abnormal condition. Indicators LAMP red READY green LAMP 1/2 WARNING WARNING SHUTTER REP. TEMP. FILTER blue orange red orange = = = = = = = = = The temperature inside the projector is elevated close to the abnormally high level. = The temperature inside the projector is abnormally high. The projector cannot be turned on.
Appendix The projector is detecting abnormal condition. Indicators LAMP red READY green WARNING WARNING SHUTTER TEMP. FILTER blue red orange = LAMP 1/2 REP. orange = Fig.2 Filter replacement icon Fig.3 Projector Condition If the Filter counter reached a time set in the timer setting, a Filter replacement icon (Fig.2) appears on the screen and the WARNING FILTER indicator on the top panel lights up. Replace the filter as soon as possible.
Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 230 MHz of Dot Clock. PC Adjustment can be limited when these modes are selected. ON-SCREEN DISPLAY VGA 1 VGA 2 VGA 3 VGA 4 VGA 5 VGA 6 VGA 7 MAC LC13 MAC 13 480p 575p RESOLUTION H-Freq.(kHz) V-Freq.
Appendix When an input signal is digital from the DVI terminal, refer to the chart below. ON-SCREEN DISPLAY D-VGA D-480p D-575p D-SVGA D-XGA D-WXGA 1 D-WXGA 2 D-WXGA 3 D-WXGA 4 D-WXGA 5 D-WXGA 6 D-WXGA 7 D-WXGA 8 D-WXGA 9 D-WXGA 10 D-WXGA 11 D-SXGA 1 D-SXGA 2 RESOLUTION H-Freq.(kHz) V-Freq.(Hz) 640x480 720x480 720x575 800x600 1024x768 1366x768 1360x768 1376x768 1360x768 1366x768 1280x768 1280x768 1280x768 1280x800 1280x800 1280x800 1280x1024 1280x1024 31.470 31.470 31.250 37.879 43.363 48.360 47.700 48.
Appendix Technical Specifications Mechanical Information Projector Type Dimensions (W x H x D) Net Weight Feet Adjustment Multi-media Projector 20.87” x 10.53” x 29.8” (530 mm x 267.5 mm x 757 mm) 60.85lbs (27.6 kg) 0˚ to 2.8˚ Panel Resolution LCD Panel System Panel Resolution Number of Pixels 1.8” TFT Active Matrix type, 3 panels 1,024 x 768 dots 2,359,296 (1,024 x 768 x 3 panels) Signal Compatibility Color System High Definition TV Signal Scanning Frequency PAL, SECAM, NTSC, NTSC4.
Appendix L The specifications are subject to change without notice. L LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels. L Each projector has its own characteristics. When projecting with several projectors on the same screen or side by side, you may recognize different white balance and color uniformity on each projector.
Appendix Configurations of Terminals ANALOG (Mini D-sub 15 pin) 4 5 10 15 9 14 2 3 8 13 1 7 12 6 11 1 2 3 4 5 6 7 8 Red Input Green Input Blue Input 1 2 3 4 5 6 7 8 T.M.D.S. Data2– T.M.D.S. Data2+ T.M.D.S. Data2 Shield No Connect No Connect DDC Clock DDC Data No Connect No Connect Ground (Horiz.sync.) Ground (Red) Ground (Green) Ground (Blue) 9 10 11 12 13 14 15 +5V Power Ground (Vert. sync.) Ground DDC Data Horiz. sync. Vert. sync.
Appendix PIN Code Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set No: 4 3 2 1* * Should the four-digit number be changed, the factory set number will be invalid. While the projector is locked with the PIN code...
Appendix Dimensions 10.53(267.5) 9.63(244.5) 4.72(120) 5.81(147.5) Unit: inch (mm) Screw Holes for Ceiling Mount Screw: M8 Depth: 0.393 (10.0) 200.0 234.0 1.18(30) 10.43(265) 7.28(185) 10.89(276.5) 5.00(127) 8.46(215) 8.27(210) 23.62(600) 8Ň 10 20.65(524.5) 8.66(220) 6.89(175) 26.77(680) 29.80(757.0) 3.03(77) 20.87(530) 9.82(249.5) 1.14(29) 9.25(235) LX1000 User Manual 020-000141-01 Rev. 1 (05-2009) 9.
Americas USA Christie Digital Systems USA, Inc. 10550 Camden Drive Cypress CA 90630 PH: 714-236-8610 FX: 714-503-3375 Customer Service: 1-866-880-4462 sales-us@christiedigital.com Canada Christie Digital Systems Canada, Inc. 809 Wellington St. N. Kitchener, Ontario N2G 4Y7 PH: 519-744-8005 FX: 519-749-3321 Customer Service: 1-800-265-2171 sales-canada@christiedigital.com Chile Representative Office Christie Digital Systems USA, Inc. Av.
