User Manual
Installation
GS Series 630-635 User Manual 30
020-001213-02 Rev. 1 (02-2018)
Installing the cable cover
1. Rotate the cable cover and insert the two guide pins into the guide holes.
2. Press and hold both lower corners of the cable cover while inserting the sheet clips into the
projector casing.
Installing the ceiling mount
Mount the projector with a Christie-approved mount, using the four mounting points on the
underside of the projector.
See List of components on page 77.
1. Refer to the installation instructions and safety guidelines provided in the kit.
See List of components on page 77.
Notice. For ultra short throw lens installation information, refer to the Ultra short throw lens
installation instruction sheet (P/N: 020-102569-XX).
Guide Pin
Guide Hole
Hold and Press Here