User Manual

Operation
GS Series 630-635 User Manual 41
020-001213-02 Rev. 1 (02-2018)
PIP-PBP
Settings
Displays an image with two sources in PIP mode
or PBP mode.
Refer to PIP/PBP Settings menu on page 44 and
PIP/PBP layout and size on page 46.
• Function—Toggles between displaying two
sources at once (main and PIP/PBP
images) or one source only.
• Main Source—Selects an active input to be
used as the main image.
• Sub Source—Selects an active input to be
used as the PIP/PBP.
• Location—Sets the location of the PIP
image on the screen.
• Size—Selects the PIP size to small,
medium, or large.
• Swap—Changes the main image to PIP/
PBP, and the PIP/PBP to main image.
Swapping is available only when PIP/PBP is
enabled.
Input Key Lists or changes the sources. • Change Sources
• List all Sources
• Auto Source
Auto Image Forces the projector to reacquire and lock to the
input signal. This is useful when signal quality is
marginal.
• Normal—Supports all of the 4:3 input
sources.
• Wide—Supports all of the 16:9 input source
and most of the 4:3 input source.
For the 4:3 input sources not recognized by
Wide mode (for example, 1400 x 1050),
perform Auto Image using Normal mode.
Source Info Displays the current source settings. (Read-
only).
Menu item Description Options