User Manual

Operation
GS Series 630-635 User Manual 47
020-001213-02 Rev. 1 (02-2018)
Menu Location Sets up the on-screen display
menu location.
• Left Top
• Right Top
• Center
• Left Bottom
• Right Bottom
LAN (Standby) Determines the power modes
for projector.
• 0.5W mode—Low power mode.
• Communication mode—Normal power mode.
Test Pattern Chooses the required internal
test pattern to display.
• None
• Grid
• White
• Black
• Checkerboard
• Color Bars
Direct Power On Automatically turns the
projector on when electrical
power is connected.
• On
• Off
Hot-Key Settings Assigns a different function to
the hot key on the IR remote
keypad by highlighting the
function in the list and
pressing Enter.
Chooses a function that does
not already have a dedicated
button, and assign the hot
key to that function, allowing
you to quickly and easily use
the chosen function.
• Blank Screen
• Aspect Ratio
• Freeze Screen
• Projector Info
Reset to Default Restores all settings to their
default value. It does not
reset network but it resets
RS232.
• Yes
• No
Service Displays projector
information, sets test
patterns, error logs, and high
temperature warnings.
• Projector Info—Displays the current projector settings.
(Read-only)
• Factory Reset—Restores all settings to their default value. It
does not reset network but it resets RS232.
• Test Pattern—Sets the required internal test pattern to
display. To turn off a test pattern, select Off.
• Wheel Index (2x)—Sets the wheel index to Speed 2X. Only
use this setting when a new main board is installed, and the
picture quality needs to be optimized.
• Wheel Index (3x)—Sets the wheel index to Speed 3X. Only
use this setting when a new main board is installed, and the
picture quality needs to be optimized.
• Error Log—Shows the projector error log for debug.
• Laser Diode Info—Displays the information of each laser
diode bank including its voltage, current, and temperature.
Menu item Description Options