User Manual

Troubleshooting
GS Series 630-635 User Manual 69
020-001213-02 Rev. 1 (02-2018)
Connection fail with new IP address
User cannot control the projector after setting up the new IP address manually.
Resolution
Make sure RJ45 cable is connected correctly and securely to the projector and the network
device.
Make sure the IP address of projector and the controlling device are set to the same region with
different IP addresses.
Connect the projector directly to the computer. If it is successfully connected, check the
network environment.
Make sure every device has a unique IP address.
Contact your network engineer if the steps above cannot resolve the network issue.