Specifications

Cube Installation and Setup

Entero HB Rear-Access Cube Installation and Setup Manual 11

020-101007-04 Rev. 1 (12-2014)

Entero HB projectors

•Power cord

• User Kit (P/N:139-100102-xx), which includes:

• Entero HB Rear-Access Cube Installation and Setup Manual (this manual, P/N: 020-

101007-04)

• IR remote control with two AA batteries

• Ball drivers: 13 mm (long), 8 mm, 5 mm, 4 mm (long), 2 mm, 2.5 mm (long)

• A pair of lint–free gloves (required for mirror and screen handling)

Motorized adjustment accessory

•Lower module

•Upper module

•DB15 harness

•DB9 harness

• Teflon washers (Qty. 2)

• Adjuster posts (Qty. 2)

Recommended installation tools

•Level

• 10 mm hex wrench or socket driver

•M6 hex driver

•M8 hex driver

• 5 mm ball driver (provided with the User Kit)

• 4 mm ball driver (provided with the User Kit)

•Adjustable wrench

• Torque wrench

• #2 Phillips™ screwdriver

Install pedestals

When you install Christie display cubes, Christie recommends that you use a Christie pedestal

designed to support the maximum stacking limit of the display cubes. Alternatively, custom

• Each display wall requires a User Kit (P/N: 139-100102-xx). One User Kit is provided with each

order, and two are provided with every four or more units ordered.